Guns International #: 102841090
Seller's Inventory #: 5503
This gun needs to be rejoined (tightening of the barrels to the action) and a repairable bulge removed from the right barrel 15" from the breech. The left firing pin needs to be replaced as it appears short. There is good wall thickness but there is pitting in the bores. All and all nothing that cannot be done but will take time and money unless one does the work him or herself.
*This was originally a very fine gun and would be worth restoring in my opinion. My estimate for this work would roughly be 1K but this would not include a re-browning of the barrels.
*The positives are that the side lever action retains 50% original case color on the locks and all the engraving is sharp and of high quality. *** Note: To see this gun with high resolution photos and a zoom-in feature, go to the vintagedoubles main site and search for the gun ID: 5503 or browse the main site to see our full gun collection.
Price:
$800.00
Antique: Yes
Manufacturer:
W. C. Scott & Son 10g. Sidelever Hammer double ~ A gunsmith special or just pretty as is for display over the hunting lodge fireplace?
Model:
None
Serial Number:
16571
Ejectors:
No
Barrels:
30
Barrel Type:
Damascus
Action:
Sidelever with rebounding hammers
Gauge:
10 gauge
Stock Comb:
2 3/16
Stock Heel:
3 3/8
Stock Cast:
1/8
LOP:
14 1/8" with st
Weight:
9 lbs 13.5 oZs
Choke Left:
.019 Mod
Choke Right:
.013 IC
Proof:Black:
2 1/2
Minimum Wall Thickness Left:
.026 towards muzzle
Minimum Wall Thickness Right:
.031
Click Photo to Enlarge |
Guns International #: 102841090
Category - W&C Scott Shotguns
- Shotguns - English Double Antique
W. C. Scott & Son 10g. Sidelever Hammer double ~ A gunsmith special or just pretty as is for display over the hunting lodge fireplace?
Description: Hammerguns - Gunsmith special or a great English double for over the rock fireplace in the lodge. This gun needs to be rejoined (tightening of the barrels to the action) and a repairable bulge removed from the right barrel 15" from the breech. The left firing pin needs to be replaced as it appears short. There is good wall thickness but there is pitting in the bores. All and all nothing that cannot be done but will take time and money unless one does the work him or herself. *This was originally a very fine gun and would be worth restoring in my opinion. My estimate for this work would roughly be 1K but this would not include a re-browning of the barrels. *The positives are that the side lever action retains 50% original case color on the locks and all the engraving is sharp and of high quality. *** Note: To see this gun with high resolution photos and a zoom-in feature, go to the vintagedoubles main site and search for the gun ID: 5503 or browse the main site to see our full gun collection. Contact Seller |
Guns International #: 102841090
Seller's Inventory #: 5503
This gun needs to be rejoined (tightening of the barrels to the action) and a repairable bulge removed from the right barrel 15" from the breech. The left firing pin needs to be replaced as it appears short. There is good wall thickness but there is pitting in the bores. All and all nothing that cannot be done but will take time and money unless one does the work him or herself.
*This was originally a very fine gun and would be worth restoring in my opinion. My estimate for this work would roughly be 1K but this would not include a re-browning of the barrels.
*The positives are that the side lever action retains 50% original case color on the locks and all the engraving is sharp and of high quality. *** Note: To see this gun with high resolution photos and a zoom-in feature, go to the vintagedoubles main site and search for the gun ID: 5503 or browse the main site to see our full gun collection.
Price:
$800.00
Antique: Yes
Manufacturer:
W. C. Scott & Son 10g. Sidelever Hammer double ~ A gunsmith special or just pretty as is for display over the hunting lodge fireplace?
Model:
None
Serial Number:
16571
Ejectors:
No
Barrels:
30
Barrel Type:
Damascus
Action:
Sidelever with rebounding hammers
Gauge:
10 gauge
Stock Comb:
2 3/16
Stock Heel:
3 3/8
Stock Cast:
1/8
LOP:
14 1/8" with st
Weight:
9 lbs 13.5 oZs
Choke Left:
.019 Mod
Choke Right:
.013 IC
Proof:Black:
2 1/2
Minimum Wall Thickness Left:
.026 towards muzzle
Minimum Wall Thickness Right:
.031
Guns International #: 102841090
Seller's Inventory #: 5503
This gun needs to be rejoined (tightening of the barrels to the action) and a repairable bulge removed from the right barrel 15" from the breech. The left firing pin needs to be replaced as it appears short. There is good wall thickness but there is pitting in the bores. All and all nothing that cannot be done but will take time and money unless one does the work him or herself.
*This was originally a very fine gun and would be worth restoring in my opinion. My estimate for this work would roughly be 1K but this would not include a re-browning of the barrels.
*The positives are that the side lever action retains 50% original case color on the locks and all the engraving is sharp and of high quality. *** Note: To see this gun with high resolution photos and a zoom-in feature, go to the vintagedoubles main site and search for the gun ID: 5503 or browse the main site to see our full gun collection.
Price:
$800.00
Antique: Yes
Manufacturer:
W. C. Scott & Son 10g. Sidelever Hammer double ~ A gunsmith special or just pretty as is for display over the hunting lodge fireplace?
Model:
None
Serial Number:
16571
Ejectors:
No
Barrels:
30
Barrel Type:
Damascus
Action:
Sidelever with rebounding hammers
Gauge:
10 gauge
Stock Comb:
2 3/16
Stock Heel:
3 3/8
Stock Cast:
1/8
LOP:
14 1/8" with st
Weight:
9 lbs 13.5 oZs
Choke Left:
.019 Mod
Choke Right:
.013 IC
Proof:Black:
2 1/2
Minimum Wall Thickness Left:
.026 towards muzzle
Minimum Wall Thickness Right:
.031