to Favorites
1 of 11
2 of 11
3 of 11
4 of 11
5 of 11
6 of 11
7 of 11
8 of 11
9 of 11
10 of 11
11 of 11
Your Session is Ending
The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
Marlin Ballard 1-3/4 Far West Hunter’s Rifle in 45-70 with Double Set-Triggers for sale
Marlin Ballard 1-3/4 Far West Hunter’s Rifle in 45-70 with Double Set-Triggers for sale
Click Photo to Enlarge
Guns International #: 102829582
Seller's Inventory #: 9
Category - Ballard Rifles
- Marlin Rifles - Antique
Marlin Ballard 1-3/4 Far West Hunter’s Rifle in 45-70 with Double Set-Triggers
Description:
This is (or originally was) a Marlin Ballard Model 1-¾ Far West Hunter’s Rifle in 45-70 Caliber. It looks refinished with an Untapered (approximately) 30-Inch x 1-1/8" across the flats Full Octagon Barrel. The Barrel appears new/replacement. The left side of the receiver is marked in two lines “MARLIN FIREARMS CO, NEW HAVEN CT. U.S.A. / BALLARD’S. PATENT NOV. 5. 1861”. Barrel is Marked “45/70 GOV’T.” on the left flat ahead of the receiver. Serial Number 251XX is on the bottom of the action in front of the lever hinge. The Buttplate is Blued Steel Crescent (Rifle) Pattern. As best we can tell, the Double-Set Triggers and Long Trigger Guard make this an unusual and nearly impossible to find Model 1-¾ Far West Hunter’s Rifle. The Barrel carries one 3/8 Dovetail Base; Two crossways dovetail cuts (filled with blank inserts); a set-screw at the muzzle; and the Receiver is Drilled & Tapped with Plug Screws in place. There's a wood plug in the forend tip that fills what could have been a ramrod or cleaning rod hole. This fully operational shooter has an excellent nearly new bore. The lever has approximately 3/8” of free play, which is better & tighter than most original Ballards; and that does not affect operation or safety. A New Vintage-Replica 35-Inch Long 8X Malcom Scope + Rings & Mounts is Available. Please Inquire. And please ask any questions or request additional information before purchase as this item will be costly to return owing to CA re-registration and other regulations. Any refunds will be minus our actual shipping cost and FFL fees after buyer pays return shipping. The listed price Includes Insured Ground Shipping from a CA FFL Dealer to yours. Payment is by Money Order, Bank (Certified) Check or Personal Check (held 2-3 days). We are the Estate Executor and Trustee, not a dealer, and cannot handle credit card or electronic payments. This item is subject to prior sale.
Price: $2,495.00
Antique: Yes
Rifle Caliber: .45-70 Government
Manufacturer: Marlin Ballard
Model: 1-3/4 Far West Hunter
Serial Number: 251xx
Barrel Length: 30 Inches
Description:
This is (or originally was) a Marlin Ballard Model 1-¾ Far West Hunter’s Rifle in 45-70 Caliber. It looks refinished with an Untapered (approximately) 30-Inch x 1-1/8" across the flats Full Octagon Barrel. The Barrel appears new/replacement. The left side of the receiver is marked in two lines “MARLIN FIREARMS CO, NEW HAVEN CT. U.S.A. / BALLARD’S. PATENT NOV. 5. 1861”. Barrel is Marked “45/70 GOV’T.” on the left flat ahead of the receiver. Serial Number 251XX is on the bottom of the action in front of the lever hinge. The Buttplate is Blued Steel Crescent (Rifle) Pattern. As best we can tell, the Double-Set Triggers and Long Trigger Guard make this an unusual and nearly impossible to find Model 1-¾ Far West Hunter’s Rifle. The Barrel carries one 3/8 Dovetail Base; Two crossways dovetail cuts (filled with blank inserts); a set-screw at the muzzle; and the Receiver is Drilled & Tapped with Plug Screws in place. There's a wood plug in the forend tip that fills what could have been a ramrod or cleaning rod hole. This fully operational shooter has an excellent nearly new bore. The lever has approximately 3/8” of free play, which is better & tighter than most original Ballards; and that does not affect operation or safety. A New Vintage-Replica 35-Inch Long 8X Malcom Scope + Rings & Mounts is Available. Please Inquire. And please ask any questions or request additional information before purchase as this item will be costly to return owing to CA re-registration and other regulations. Any refunds will be minus our actual shipping cost and FFL fees after buyer pays return shipping. The listed price Includes Insured Ground Shipping from a CA FFL Dealer to yours. Payment is by Money Order, Bank (Certified) Check or Personal Check (held 2-3 days). We are the Estate Executor and Trustee, not a dealer, and cannot handle credit card or electronic payments. This item is subject to prior sale.
Price: $2,495.00
Antique: Yes
Rifle Caliber: .45-70 Government
Manufacturer: Marlin Ballard
Model: 1-3/4 Far West Hunter
Serial Number: 251xx
Barrel Length: 30 Inches
Contact Seller
|
Click Photo to Enlarge
|
Guns International #: 102829582
Category - Ballard Rifles
- Marlin Rifles - Antique
Marlin Ballard 1-3/4 Far West Hunter’s Rifle in 45-70 with Double Set-Triggers
Description: This is (or originally was) a Marlin Ballard Model 1-¾ Far West Hunter’s Rifle in 45-70 Caliber. It looks refinished with an Untapered (approximately) 30-Inch x 1-1/8" across the flats Full Octagon Barrel. The Barrel appears new/replacement. The left side of the receiver is marked in two lines “MARLIN FIREARMS CO, NEW HAVEN CT. U.S.A. / BALLARD’S. PATENT NOV. 5. 1861”. Barrel is Marked “45/70 GOV’T.” on the left flat ahead of the receiver. Serial Number 251XX is on the bottom of the action in front of the lever hinge. The Buttplate is Blued Steel Crescent (Rifle) Pattern. As best we can tell, the Double-Set Triggers and Long Trigger Guard make this an unusual and nearly impossible to find Model 1-¾ Far West Hunter’s Rifle. The Barrel carries one 3/8 Dovetail Base; Two crossways dovetail cuts (filled with blank inserts); a set-screw at the muzzle; and the Receiver is Drilled & Tapped with Plug Screws in place. There's a wood plug in the forend tip that fills what could have been a ramrod or cleaning rod hole. This fully operational shooter has an excellent nearly new bore. The lever has approximately 3/8” of free play, which is better & tighter than most original Ballards; and that does not affect operation or safety. A New Vintage-Replica 35-Inch Long 8X Malcom Scope + Rings & Mounts is Available. Please Inquire. And please ask any questions or request additional information before purchase as this item will be costly to return owing to CA re-registration and other regulations. Any refunds will be minus our actual shipping cost and FFL fees after buyer pays return shipping. The listed price Includes Insured Ground Shipping from a CA FFL Dealer to yours. Payment is by Money Order, Bank (Certified) Check or Personal Check (held 2-3 days). We are the Estate Executor and Trustee, not a dealer, and cannot handle credit card or electronic payments. This item is subject to prior sale. Price: $2,495.00 Antique: Yes Rifle Caliber: .45-70 Government Manufacturer: Marlin Ballard Model: 1-3/4 Far West Hunter Serial Number: 251xx Barrel Length: 30 Inches Contact Seller |
Click Photo to Enlarge
Guns International #: 102829582
Seller's Inventory #: 9
Category - Ballard Rifles
- Marlin Rifles - Antique
Marlin Ballard 1-3/4 Far West Hunter’s Rifle in 45-70 with Double Set-Triggers
Description:
This is (or originally was) a Marlin Ballard Model 1-¾ Far West Hunter’s Rifle in 45-70 Caliber. It looks refinished with an Untapered (approximately) 30-Inch x 1-1/8" across the flats Full Octagon Barrel. The Barrel appears new/replacement. The left side of the receiver is marked in two lines “MARLIN FIREARMS CO, NEW HAVEN CT. U.S.A. / BALLARD’S. PATENT NOV. 5. 1861”. Barrel is Marked “45/70 GOV’T.” on the left flat ahead of the receiver. Serial Number 251XX is on the bottom of the action in front of the lever hinge. The Buttplate is Blued Steel Crescent (Rifle) Pattern. As best we can tell, the Double-Set Triggers and Long Trigger Guard make this an unusual and nearly impossible to find Model 1-¾ Far West Hunter’s Rifle. The Barrel carries one 3/8 Dovetail Base; Two crossways dovetail cuts (filled with blank inserts); a set-screw at the muzzle; and the Receiver is Drilled & Tapped with Plug Screws in place. There's a wood plug in the forend tip that fills what could have been a ramrod or cleaning rod hole. This fully operational shooter has an excellent nearly new bore. The lever has approximately 3/8” of free play, which is better & tighter than most original Ballards; and that does not affect operation or safety. A New Vintage-Replica 35-Inch Long 8X Malcom Scope + Rings & Mounts is Available. Please Inquire. And please ask any questions or request additional information before purchase as this item will be costly to return owing to CA re-registration and other regulations. Any refunds will be minus our actual shipping cost and FFL fees after buyer pays return shipping. The listed price Includes Insured Ground Shipping from a CA FFL Dealer to yours. Payment is by Money Order, Bank (Certified) Check or Personal Check (held 2-3 days). We are the Estate Executor and Trustee, not a dealer, and cannot handle credit card or electronic payments. This item is subject to prior sale.
Price: $2,495.00
Antique: Yes
Rifle Caliber: .45-70 Government
Manufacturer: Marlin Ballard
Model: 1-3/4 Far West Hunter
Serial Number: 251xx
Barrel Length: 30 Inches
Description:
This is (or originally was) a Marlin Ballard Model 1-¾ Far West Hunter’s Rifle in 45-70 Caliber. It looks refinished with an Untapered (approximately) 30-Inch x 1-1/8" across the flats Full Octagon Barrel. The Barrel appears new/replacement. The left side of the receiver is marked in two lines “MARLIN FIREARMS CO, NEW HAVEN CT. U.S.A. / BALLARD’S. PATENT NOV. 5. 1861”. Barrel is Marked “45/70 GOV’T.” on the left flat ahead of the receiver. Serial Number 251XX is on the bottom of the action in front of the lever hinge. The Buttplate is Blued Steel Crescent (Rifle) Pattern. As best we can tell, the Double-Set Triggers and Long Trigger Guard make this an unusual and nearly impossible to find Model 1-¾ Far West Hunter’s Rifle. The Barrel carries one 3/8 Dovetail Base; Two crossways dovetail cuts (filled with blank inserts); a set-screw at the muzzle; and the Receiver is Drilled & Tapped with Plug Screws in place. There's a wood plug in the forend tip that fills what could have been a ramrod or cleaning rod hole. This fully operational shooter has an excellent nearly new bore. The lever has approximately 3/8” of free play, which is better & tighter than most original Ballards; and that does not affect operation or safety. A New Vintage-Replica 35-Inch Long 8X Malcom Scope + Rings & Mounts is Available. Please Inquire. And please ask any questions or request additional information before purchase as this item will be costly to return owing to CA re-registration and other regulations. Any refunds will be minus our actual shipping cost and FFL fees after buyer pays return shipping. The listed price Includes Insured Ground Shipping from a CA FFL Dealer to yours. Payment is by Money Order, Bank (Certified) Check or Personal Check (held 2-3 days). We are the Estate Executor and Trustee, not a dealer, and cannot handle credit card or electronic payments. This item is subject to prior sale.
Price: $2,495.00
Antique: Yes
Rifle Caliber: .45-70 Government
Manufacturer: Marlin Ballard
Model: 1-3/4 Far West Hunter
Serial Number: 251xx
Barrel Length: 30 Inches
Guns International #: 102829582
Seller's Inventory #: 9
Guns International #: 102829582
Seller's Inventory #: 9
Category - Ballard Rifles
- Marlin Rifles - Antique
Marlin Ballard 1-3/4 Far West Hunter’s Rifle in 45-70 with Double Set-Triggers
Description:
This is (or originally was) a Marlin Ballard Model 1-¾ Far West Hunter’s Rifle in 45-70 Caliber. It looks refinished with an Untapered (approximately) 30-Inch x 1-1/8" across the flats Full Octagon Barrel. The Barrel appears new/replacement. The left side of the receiver is marked in two lines “MARLIN FIREARMS CO, NEW HAVEN CT. U.S.A. / BALLARD’S. PATENT NOV. 5. 1861”. Barrel is Marked “45/70 GOV’T.” on the left flat ahead of the receiver. Serial Number 251XX is on the bottom of the action in front of the lever hinge. The Buttplate is Blued Steel Crescent (Rifle) Pattern. As best we can tell, the Double-Set Triggers and Long Trigger Guard make this an unusual and nearly impossible to find Model 1-¾ Far West Hunter’s Rifle. The Barrel carries one 3/8 Dovetail Base; Two crossways dovetail cuts (filled with blank inserts); a set-screw at the muzzle; and the Receiver is Drilled & Tapped with Plug Screws in place. There's a wood plug in the forend tip that fills what could have been a ramrod or cleaning rod hole. This fully operational shooter has an excellent nearly new bore. The lever has approximately 3/8” of free play, which is better & tighter than most original Ballards; and that does not affect operation or safety. A New Vintage-Replica 35-Inch Long 8X Malcom Scope + Rings & Mounts is Available. Please Inquire. And please ask any questions or request additional information before purchase as this item will be costly to return owing to CA re-registration and other regulations. Any refunds will be minus our actual shipping cost and FFL fees after buyer pays return shipping. The listed price Includes Insured Ground Shipping from a CA FFL Dealer to yours. Payment is by Money Order, Bank (Certified) Check or Personal Check (held 2-3 days). We are the Estate Executor and Trustee, not a dealer, and cannot handle credit card or electronic payments. This item is subject to prior sale.
Price: $2,495.00
Antique: Yes
Rifle Caliber: .45-70 Government
Manufacturer: Marlin Ballard
Model: 1-3/4 Far West Hunter
Serial Number: 251xx
Barrel Length: 30 Inches
Description:
This is (or originally was) a Marlin Ballard Model 1-¾ Far West Hunter’s Rifle in 45-70 Caliber. It looks refinished with an Untapered (approximately) 30-Inch x 1-1/8" across the flats Full Octagon Barrel. The Barrel appears new/replacement. The left side of the receiver is marked in two lines “MARLIN FIREARMS CO, NEW HAVEN CT. U.S.A. / BALLARD’S. PATENT NOV. 5. 1861”. Barrel is Marked “45/70 GOV’T.” on the left flat ahead of the receiver. Serial Number 251XX is on the bottom of the action in front of the lever hinge. The Buttplate is Blued Steel Crescent (Rifle) Pattern. As best we can tell, the Double-Set Triggers and Long Trigger Guard make this an unusual and nearly impossible to find Model 1-¾ Far West Hunter’s Rifle. The Barrel carries one 3/8 Dovetail Base; Two crossways dovetail cuts (filled with blank inserts); a set-screw at the muzzle; and the Receiver is Drilled & Tapped with Plug Screws in place. There's a wood plug in the forend tip that fills what could have been a ramrod or cleaning rod hole. This fully operational shooter has an excellent nearly new bore. The lever has approximately 3/8” of free play, which is better & tighter than most original Ballards; and that does not affect operation or safety. A New Vintage-Replica 35-Inch Long 8X Malcom Scope + Rings & Mounts is Available. Please Inquire. And please ask any questions or request additional information before purchase as this item will be costly to return owing to CA re-registration and other regulations. Any refunds will be minus our actual shipping cost and FFL fees after buyer pays return shipping. The listed price Includes Insured Ground Shipping from a CA FFL Dealer to yours. Payment is by Money Order, Bank (Certified) Check or Personal Check (held 2-3 days). We are the Estate Executor and Trustee, not a dealer, and cannot handle credit card or electronic payments. This item is subject to prior sale.
Price: $2,495.00
Antique: Yes
Rifle Caliber: .45-70 Government
Manufacturer: Marlin Ballard
Model: 1-3/4 Far West Hunter
Serial Number: 251xx
Barrel Length: 30 Inches
Contact Seller
Buy Now
Guns International Advertising Policy
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classifed advertising of guns, gun related items and services for sale online. If you are looking to buy guns or sell guns, you have come to the right place. GunsInternational.com gun classifieds currently have over 100,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classifed advertising of guns, gun related items and services for sale online. If you are looking to buy guns or sell guns, you have come to the right place. GunsInternational.com gun classifieds currently have over 100,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
Listings
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
©2006 - 2024 all rights reserved. | Guns International.com | V4.1 ww1
Privacy Policy
User Agreement
FAQs
Contact Us
©2006 - 2024 all rights reserved.
Guns International.com | V4.1 ww1
Guns International.com | V4.1 ww1