Guns International #: 100808939
Click Photo to Enlarge |
Guns International #: 100808939
Category - Custom Rifles
- Tactical Rifles
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: rampro6698
Company: Member Since: 7/27/10
State:
Texas
Country: United States
Phone:
(806) 831-6907
Active Listings: 0
Total Listings: 17
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
Payment Methods: certified bank check
.375 snipe-tac custom bolt action single shot 34" with accessories
Description: .375 snipe tac Viersco Manufacturing custom 34" ultra long range rifle with accessories. This rifle is a single shot bolt action built with a Nesika action and a Lothar Walther 34" barrel with 1:11 twist rate for 350-400 grain bullets. This rifle has NEVER been fired! I ordered it and never setup everything for reloading. David Viers said it grouped 3/8" with 3 shots at 100 yards when he tested it for accuracy before shipping it to me. The rifle has been coating with a Dura Coat digital urban camo paint scheme. It includes the Sinclair International F class bipod you see in the pics as well as the mounted Night Force NXS 8-32x56 scope with NP-R1 reticle in MOA. The stock is an XLR Industries BMG Chassis. It has a 30 MOA base with Badger Ordinance rings. The trigger is a Jewel trigger set at about 8-10 oz but it is adjustable to a heavier pull. The last picture shows the .375 snipe tac next to a .308 winchester for size comparison. This cartridge will fire a .375 bullet weighing 350 to 400 grains at about 3100 to 3250 fps, depending on the load, from this 34" barrel. David Viers said he can see the impact of the bullet through the scope due to little or no movement of the scope upon recoil because the gun weighs about 30 pounds. It has a Shark Bite muzzle break. Also includes the following accessories: 100 pieces of brand new Jamison .375 snipe tac brass (these can be loaded right away with no need for fireforming, etc. And they use large rifle magnum primers. These are about 4 bucks per piece of brass!) Custom reloading dies made by David Viers. There is a sizing die and a micrometer bullet seating die. These will fit in a standard single stage press with the collet bolt removed (you don't need a .50 BMG press). 100 Sierra Matchking 350 grain .375 caliber boat tail hollowpoint bullets MIL Heavy Duty Aluminum rifle case that will hold the entire gun without the bipod attached This is truly a 2000 plus yard gun. It is a single shot (no magazine). It can be reloaded with large rifle magnum primers on a standard single stage press made to handle cartridges like a .338 Lapua. Please note that in order to ship this gun I will likely need to ship the barreled action separate from the stock due to weight, etc. So I would likely ship the barreled action in the rifle case and ship the stock, bipod, and other accessories separately. SOLD |
Guns International #: 100808939
Guns International #: 100808939