to Favorites
1 of 3
2 of 3
3 of 3
Your Session is Ending
The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
Anschutz 64S BR Benchrest Rifle .22lr
Anschutz 64S BR Benchrest Rifle .22lr
Click Photo to Enlarge
Guns International #: 100545985
Category - Anschutz Rifles
- Benchrest and Target Rifles - Rimfire
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: jerryg22
Company:
Company:
Member Since: 4/7/15
First Name: Jerry
Last Name: Goldfarb
State:
Florida
Zip: 33442
Country: United States
Phone:
(561) 985-5605
Active Listings: 0
Total Listings: 2
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
Payment Methods: Check, Money Order
Anschutz 64S BR Benchrest Rifle .22lr
Description:
64 Sporter Benchrest - The repeater for benchrest shooting
With the repeater 64 Sporter Benchrest ANSCHÜTZ now offers the friends of benchrest shooting a light rifle with utmost ANSCHÜTZ accuracy. The model 64 Sporter Benchrest is delivered in the cal. .22 l.r. with a 5-shot magazine.
The rifle is equipped with the rubber butt plate 4709 A. The backend, however, is prepared to attach the variably adjustable butt plate carrier with tilting column guide.
In order to save weight and thus make the rifle suitable for the lower weight disciplines the flat forend was millcut on the bedding side. The ones who intend to use the rifle for the high weight disciplines are free, however, to use additional weights in these millcuts. The additional weights can also be used there to adjust the rifle to the individual balance preferences of the shooter.
To increase accuracy the target crown was subjected to a special treatment to reach perfect target groups. The rifle is equipped with a ANSCHÜTZ target heavy barrel and fulfills all accuracy requirements.
The receiver is drilled and tapped to take scope mounts for a telescopic sight as well as 11mm dovetails.
At this model of the series Match 64 modifications were carried out in the area of the receiver. The external diameter was enlarged from 25 mm to 26 mm. This modification entails some advantages. The weight of the receiver was increased by 12 % which makes the barreled action more rigid. In addition the locking surface is enlarged by 15 % which leads to even more safety for the shooter when firing the shot. The new shape of the receiver will be continued in the firing pin nut which makes the system more elegant. In addition the old engraving on the upper side of the prism has been replaced by the more attractive „Wave-Style“.
Due to its versatile possibilities for additions and modifications this model is extraordinarily suitable to be used for benchrest shooting.
Very low round count
No problems with ejection.
Stock has been bedded, action screws and firing pin spring upgraded.
Teflon tape added to forearm and butt allows for slick free recoil shooting and can be removed with a hair dryer.
The trigger is a two stage adjustable target trigger.
The tuner is INCLUDED. It is an Ezell PDT (powdered titanium) tuner cut to the exact Purdy PRX of this rifle.
Scope and rings shown are NOT INCLUDED.
Will ship to FFL in CONUS who will accept from an individual.
This will not disappoint.
Will ship to FFL in CONUS who will acceptfrom individual. Insured shipping cost is $30.00
SOLD
Description:
64 Sporter Benchrest - The repeater for benchrest shooting
With the repeater 64 Sporter Benchrest ANSCHÜTZ now offers the friends of benchrest shooting a light rifle with utmost ANSCHÜTZ accuracy. The model 64 Sporter Benchrest is delivered in the cal. .22 l.r. with a 5-shot magazine.
The rifle is equipped with the rubber butt plate 4709 A. The backend, however, is prepared to attach the variably adjustable butt plate carrier with tilting column guide.
In order to save weight and thus make the rifle suitable for the lower weight disciplines the flat forend was millcut on the bedding side. The ones who intend to use the rifle for the high weight disciplines are free, however, to use additional weights in these millcuts. The additional weights can also be used there to adjust the rifle to the individual balance preferences of the shooter.
To increase accuracy the target crown was subjected to a special treatment to reach perfect target groups. The rifle is equipped with a ANSCHÜTZ target heavy barrel and fulfills all accuracy requirements.
The receiver is drilled and tapped to take scope mounts for a telescopic sight as well as 11mm dovetails.
At this model of the series Match 64 modifications were carried out in the area of the receiver. The external diameter was enlarged from 25 mm to 26 mm. This modification entails some advantages. The weight of the receiver was increased by 12 % which makes the barreled action more rigid. In addition the locking surface is enlarged by 15 % which leads to even more safety for the shooter when firing the shot. The new shape of the receiver will be continued in the firing pin nut which makes the system more elegant. In addition the old engraving on the upper side of the prism has been replaced by the more attractive „Wave-Style“.
Due to its versatile possibilities for additions and modifications this model is extraordinarily suitable to be used for benchrest shooting.
Very low round count
No problems with ejection.
Stock has been bedded, action screws and firing pin spring upgraded.
Teflon tape added to forearm and butt allows for slick free recoil shooting and can be removed with a hair dryer.
The trigger is a two stage adjustable target trigger.
The tuner is INCLUDED. It is an Ezell PDT (powdered titanium) tuner cut to the exact Purdy PRX of this rifle.
Scope and rings shown are NOT INCLUDED.
Will ship to FFL in CONUS who will accept from an individual.
This will not disappoint.
Will ship to FFL in CONUS who will acceptfrom individual. Insured shipping cost is $30.00
SOLD
|
Click Photo to Enlarge
|
Guns International #: 100545985
Category - Anschutz Rifles
- Benchrest and Target Rifles - Rimfire
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: jerryg22
Company: Member Since: 4/7/15
First Name: Jerry
Last Name: Goldfarb
State:
Florida
Zip: 33442
Country: United States
Phone:
(561) 985-5605
Active Listings: 0
Total Listings: 2
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
Payment Methods: Check, Money Order
Anschutz 64S BR Benchrest Rifle .22lr
Description: 64 Sporter Benchrest - The repeater for benchrest shooting With the repeater 64 Sporter Benchrest ANSCHÜTZ now offers the friends of benchrest shooting a light rifle with utmost ANSCHÜTZ accuracy. The model 64 Sporter Benchrest is delivered in the cal. .22 l.r. with a 5-shot magazine. The rifle is equipped with the rubber butt plate 4709 A. The backend, however, is prepared to attach the variably adjustable butt plate carrier with tilting column guide. In order to save weight and thus make the rifle suitable for the lower weight disciplines the flat forend was millcut on the bedding side. The ones who intend to use the rifle for the high weight disciplines are free, however, to use additional weights in these millcuts. The additional weights can also be used there to adjust the rifle to the individual balance preferences of the shooter. To increase accuracy the target crown was subjected to a special treatment to reach perfect target groups. The rifle is equipped with a ANSCHÜTZ target heavy barrel and fulfills all accuracy requirements. The receiver is drilled and tapped to take scope mounts for a telescopic sight as well as 11mm dovetails. At this model of the series Match 64 modifications were carried out in the area of the receiver. The external diameter was enlarged from 25 mm to 26 mm. This modification entails some advantages. The weight of the receiver was increased by 12 % which makes the barreled action more rigid. In addition the locking surface is enlarged by 15 % which leads to even more safety for the shooter when firing the shot. The new shape of the receiver will be continued in the firing pin nut which makes the system more elegant. In addition the old engraving on the upper side of the prism has been replaced by the more attractive „Wave-Style“. Due to its versatile possibilities for additions and modifications this model is extraordinarily suitable to be used for benchrest shooting. Very low round count No problems with ejection. Stock has been bedded, action screws and firing pin spring upgraded. Teflon tape added to forearm and butt allows for slick free recoil shooting and can be removed with a hair dryer. The trigger is a two stage adjustable target trigger. The tuner is INCLUDED. It is an Ezell PDT (powdered titanium) tuner cut to the exact Purdy PRX of this rifle. Scope and rings shown are NOT INCLUDED. Will ship to FFL in CONUS who will accept from an individual. This will not disappoint. Will ship to FFL in CONUS who will acceptfrom individual. Insured shipping cost is $30.00 SOLD |
Click Photo to Enlarge
Guns International #: 100545985
Category - Anschutz Rifles
- Benchrest and Target Rifles - Rimfire
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: jerryg22
Company:
Company:
Member Since: 4/7/15
First Name: Jerry
Last Name: Goldfarb
State:
Florida
Zip: 33442
Country: United States
Phone:
(561) 985-5605
Active Listings: 0
Total Listings: 2
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
Payment Methods: Check, Money Order
Anschutz 64S BR Benchrest Rifle .22lr
Description:
64 Sporter Benchrest - The repeater for benchrest shooting
With the repeater 64 Sporter Benchrest ANSCHÜTZ now offers the friends of benchrest shooting a light rifle with utmost ANSCHÜTZ accuracy. The model 64 Sporter Benchrest is delivered in the cal. .22 l.r. with a 5-shot magazine.
The rifle is equipped with the rubber butt plate 4709 A. The backend, however, is prepared to attach the variably adjustable butt plate carrier with tilting column guide.
In order to save weight and thus make the rifle suitable for the lower weight disciplines the flat forend was millcut on the bedding side. The ones who intend to use the rifle for the high weight disciplines are free, however, to use additional weights in these millcuts. The additional weights can also be used there to adjust the rifle to the individual balance preferences of the shooter.
To increase accuracy the target crown was subjected to a special treatment to reach perfect target groups. The rifle is equipped with a ANSCHÜTZ target heavy barrel and fulfills all accuracy requirements.
The receiver is drilled and tapped to take scope mounts for a telescopic sight as well as 11mm dovetails.
At this model of the series Match 64 modifications were carried out in the area of the receiver. The external diameter was enlarged from 25 mm to 26 mm. This modification entails some advantages. The weight of the receiver was increased by 12 % which makes the barreled action more rigid. In addition the locking surface is enlarged by 15 % which leads to even more safety for the shooter when firing the shot. The new shape of the receiver will be continued in the firing pin nut which makes the system more elegant. In addition the old engraving on the upper side of the prism has been replaced by the more attractive „Wave-Style“.
Due to its versatile possibilities for additions and modifications this model is extraordinarily suitable to be used for benchrest shooting.
Very low round count
No problems with ejection.
Stock has been bedded, action screws and firing pin spring upgraded.
Teflon tape added to forearm and butt allows for slick free recoil shooting and can be removed with a hair dryer.
The trigger is a two stage adjustable target trigger.
The tuner is INCLUDED. It is an Ezell PDT (powdered titanium) tuner cut to the exact Purdy PRX of this rifle.
Scope and rings shown are NOT INCLUDED.
Will ship to FFL in CONUS who will accept from an individual.
This will not disappoint.
Will ship to FFL in CONUS who will acceptfrom individual. Insured shipping cost is $30.00
SOLD
Description:
64 Sporter Benchrest - The repeater for benchrest shooting
With the repeater 64 Sporter Benchrest ANSCHÜTZ now offers the friends of benchrest shooting a light rifle with utmost ANSCHÜTZ accuracy. The model 64 Sporter Benchrest is delivered in the cal. .22 l.r. with a 5-shot magazine.
The rifle is equipped with the rubber butt plate 4709 A. The backend, however, is prepared to attach the variably adjustable butt plate carrier with tilting column guide.
In order to save weight and thus make the rifle suitable for the lower weight disciplines the flat forend was millcut on the bedding side. The ones who intend to use the rifle for the high weight disciplines are free, however, to use additional weights in these millcuts. The additional weights can also be used there to adjust the rifle to the individual balance preferences of the shooter.
To increase accuracy the target crown was subjected to a special treatment to reach perfect target groups. The rifle is equipped with a ANSCHÜTZ target heavy barrel and fulfills all accuracy requirements.
The receiver is drilled and tapped to take scope mounts for a telescopic sight as well as 11mm dovetails.
At this model of the series Match 64 modifications were carried out in the area of the receiver. The external diameter was enlarged from 25 mm to 26 mm. This modification entails some advantages. The weight of the receiver was increased by 12 % which makes the barreled action more rigid. In addition the locking surface is enlarged by 15 % which leads to even more safety for the shooter when firing the shot. The new shape of the receiver will be continued in the firing pin nut which makes the system more elegant. In addition the old engraving on the upper side of the prism has been replaced by the more attractive „Wave-Style“.
Due to its versatile possibilities for additions and modifications this model is extraordinarily suitable to be used for benchrest shooting.
Very low round count
No problems with ejection.
Stock has been bedded, action screws and firing pin spring upgraded.
Teflon tape added to forearm and butt allows for slick free recoil shooting and can be removed with a hair dryer.
The trigger is a two stage adjustable target trigger.
The tuner is INCLUDED. It is an Ezell PDT (powdered titanium) tuner cut to the exact Purdy PRX of this rifle.
Scope and rings shown are NOT INCLUDED.
Will ship to FFL in CONUS who will accept from an individual.
This will not disappoint.
Will ship to FFL in CONUS who will acceptfrom individual. Insured shipping cost is $30.00
SOLD
Guns International #: 100545985
Guns International #: 100545985
Category - Anschutz Rifles
- Benchrest and Target Rifles - Rimfire
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: jerryg22
Company:
Company:
Member Since: 4/7/15
First Name: Jerry
Last Name: Goldfarb
State:
Florida
Zip: 33442
Country: United States
Phone:
(561) 985-5605
Active Listings: 0
Total Listings: 2
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
Payment Methods: Check, Money Order
Anschutz 64S BR Benchrest Rifle .22lr
Description:
64 Sporter Benchrest - The repeater for benchrest shooting
With the repeater 64 Sporter Benchrest ANSCHÜTZ now offers the friends of benchrest shooting a light rifle with utmost ANSCHÜTZ accuracy. The model 64 Sporter Benchrest is delivered in the cal. .22 l.r. with a 5-shot magazine.
The rifle is equipped with the rubber butt plate 4709 A. The backend, however, is prepared to attach the variably adjustable butt plate carrier with tilting column guide.
In order to save weight and thus make the rifle suitable for the lower weight disciplines the flat forend was millcut on the bedding side. The ones who intend to use the rifle for the high weight disciplines are free, however, to use additional weights in these millcuts. The additional weights can also be used there to adjust the rifle to the individual balance preferences of the shooter.
To increase accuracy the target crown was subjected to a special treatment to reach perfect target groups. The rifle is equipped with a ANSCHÜTZ target heavy barrel and fulfills all accuracy requirements.
The receiver is drilled and tapped to take scope mounts for a telescopic sight as well as 11mm dovetails.
At this model of the series Match 64 modifications were carried out in the area of the receiver. The external diameter was enlarged from 25 mm to 26 mm. This modification entails some advantages. The weight of the receiver was increased by 12 % which makes the barreled action more rigid. In addition the locking surface is enlarged by 15 % which leads to even more safety for the shooter when firing the shot. The new shape of the receiver will be continued in the firing pin nut which makes the system more elegant. In addition the old engraving on the upper side of the prism has been replaced by the more attractive „Wave-Style“.
Due to its versatile possibilities for additions and modifications this model is extraordinarily suitable to be used for benchrest shooting.
Very low round count
No problems with ejection.
Stock has been bedded, action screws and firing pin spring upgraded.
Teflon tape added to forearm and butt allows for slick free recoil shooting and can be removed with a hair dryer.
The trigger is a two stage adjustable target trigger.
The tuner is INCLUDED. It is an Ezell PDT (powdered titanium) tuner cut to the exact Purdy PRX of this rifle.
Scope and rings shown are NOT INCLUDED.
Will ship to FFL in CONUS who will accept from an individual.
This will not disappoint.
Will ship to FFL in CONUS who will acceptfrom individual. Insured shipping cost is $30.00
SOLD
Description:
64 Sporter Benchrest - The repeater for benchrest shooting
With the repeater 64 Sporter Benchrest ANSCHÜTZ now offers the friends of benchrest shooting a light rifle with utmost ANSCHÜTZ accuracy. The model 64 Sporter Benchrest is delivered in the cal. .22 l.r. with a 5-shot magazine.
The rifle is equipped with the rubber butt plate 4709 A. The backend, however, is prepared to attach the variably adjustable butt plate carrier with tilting column guide.
In order to save weight and thus make the rifle suitable for the lower weight disciplines the flat forend was millcut on the bedding side. The ones who intend to use the rifle for the high weight disciplines are free, however, to use additional weights in these millcuts. The additional weights can also be used there to adjust the rifle to the individual balance preferences of the shooter.
To increase accuracy the target crown was subjected to a special treatment to reach perfect target groups. The rifle is equipped with a ANSCHÜTZ target heavy barrel and fulfills all accuracy requirements.
The receiver is drilled and tapped to take scope mounts for a telescopic sight as well as 11mm dovetails.
At this model of the series Match 64 modifications were carried out in the area of the receiver. The external diameter was enlarged from 25 mm to 26 mm. This modification entails some advantages. The weight of the receiver was increased by 12 % which makes the barreled action more rigid. In addition the locking surface is enlarged by 15 % which leads to even more safety for the shooter when firing the shot. The new shape of the receiver will be continued in the firing pin nut which makes the system more elegant. In addition the old engraving on the upper side of the prism has been replaced by the more attractive „Wave-Style“.
Due to its versatile possibilities for additions and modifications this model is extraordinarily suitable to be used for benchrest shooting.
Very low round count
No problems with ejection.
Stock has been bedded, action screws and firing pin spring upgraded.
Teflon tape added to forearm and butt allows for slick free recoil shooting and can be removed with a hair dryer.
The trigger is a two stage adjustable target trigger.
The tuner is INCLUDED. It is an Ezell PDT (powdered titanium) tuner cut to the exact Purdy PRX of this rifle.
Scope and rings shown are NOT INCLUDED.
Will ship to FFL in CONUS who will accept from an individual.
This will not disappoint.
Will ship to FFL in CONUS who will acceptfrom individual. Insured shipping cost is $30.00
SOLD
Guns International Advertising Policy
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classifed advertising of guns, gun related items and services for sale online. If you are looking to buy guns or sell guns, you have come to the right place. GunsInternational.com gun classifieds currently have over 100,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classifed advertising of guns, gun related items and services for sale online. If you are looking to buy guns or sell guns, you have come to the right place. GunsInternational.com gun classifieds currently have over 100,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
Listings
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
©2006 - 2025 all rights reserved. | Guns International.com | V4.1 ww1
Privacy Policy
User Agreement
FAQs
Contact Us
©2006 - 2025 all rights reserved.
Guns International.com | V4.1 ww1
Guns International.com | V4.1 ww1