to Favorites
1 of 11
2 of 11
3 of 11
4 of 11
5 of 11
6 of 11
7 of 11
8 of 11
9 of 11
10 of 11
11 of 11
Your Session is Ending
The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
Smith & Wesson Colt Python Custom- SMOLT-SMYTHON 6
Smith & Wesson Colt Python Custom- SMOLT-SMYTHON 6
Click Photo to Enlarge
Guns International #: 100556179
Category - Smith & Wesson Revolvers - Model 19
- .357 Magnum Revolvers
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Old Centurion
Company: NewCenturion Arms
Company: NewCenturion Arms
Member Since: 11/19/13
First Name: Gary
Last Name: Bryant
State:
Florida
Zip: 34442
Country: United States
Phone:
(352) 601-6942
Active Listings: 0
Total Listings: 100
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
Buyer pays shipping on return
Buyer pays shipping on return
Payment Methods: Postal Money Order,cashiers check
Smith & Wesson Colt Python Custom- SMOLT-SMYTHON 6
Description:
Can't afford a Colt Python?? here is your answer! This is a custom made S&W Model 19 pined barrel recessed cylinder complete with target hammer, target trigger white outline sight, red ramp front. The Colt Python barrel has been perfectly machined and threaded to fit the Smith frame, the ejector rod housing has been milled out for the S&W rod. A crane lock had been installed for secure cylinder lock up. The S&W action has been hand tuned and is super smooth with a clean break for single action.I didn't go all the way as some shooters like to put their own desired "trigger pull" so there is more than enough stock left for that. The superb Industrial Hard Chrome finish was done in bright.I fired the gun before it was plated and it is VERY accurate, I will say because of the barrel to cylinder tolerance lead bullets will jam up fairly quickly on the cylinder, shoot jacketed or plated bullets only. Please ask questions before you bid. $25 Flat rate shipping with insurance to the lower 48. Sold by individual to FFL only.
Parts cost: S&W Mod. 19-pinned & recessed $800
Python barrel $500
Target Hammer Trigger $150
N frame sight w/o $125
Hand made Rosewood grips $75
Industrial hard chrome bright $225
TOTAL is $1875.00 with no labor cost or profit!
NOTE: I just function fired this revolver with 6 magnums and 6 38 spl. 3 magnum lead heads all factory ammo. Acuracy is amazing but as I knew it started to bind the cylinder after the 3 lead bullets.
I HAVE JUST raised the price on this gun after trying to obtain parts to build a similar gun but with blueing and other options and priced just components that exceed $1900.00 now so I may need to turn down the order or charge $2550.00 for the gun.
NOW AT $1750.00, YOU CAN NOT REPRODUCE THIS GUN FOR THE PRICE NOW! At the end of this listing I will not list it again, it's going back into the safe!
SOLD
Description:
Can't afford a Colt Python?? here is your answer! This is a custom made S&W Model 19 pined barrel recessed cylinder complete with target hammer, target trigger white outline sight, red ramp front. The Colt Python barrel has been perfectly machined and threaded to fit the Smith frame, the ejector rod housing has been milled out for the S&W rod. A crane lock had been installed for secure cylinder lock up. The S&W action has been hand tuned and is super smooth with a clean break for single action.I didn't go all the way as some shooters like to put their own desired "trigger pull" so there is more than enough stock left for that. The superb Industrial Hard Chrome finish was done in bright.I fired the gun before it was plated and it is VERY accurate, I will say because of the barrel to cylinder tolerance lead bullets will jam up fairly quickly on the cylinder, shoot jacketed or plated bullets only. Please ask questions before you bid. $25 Flat rate shipping with insurance to the lower 48. Sold by individual to FFL only.
Parts cost: S&W Mod. 19-pinned & recessed $800
Python barrel $500
Target Hammer Trigger $150
N frame sight w/o $125
Hand made Rosewood grips $75
Industrial hard chrome bright $225
TOTAL is $1875.00 with no labor cost or profit!
NOTE: I just function fired this revolver with 6 magnums and 6 38 spl. 3 magnum lead heads all factory ammo. Acuracy is amazing but as I knew it started to bind the cylinder after the 3 lead bullets.
I HAVE JUST raised the price on this gun after trying to obtain parts to build a similar gun but with blueing and other options and priced just components that exceed $1900.00 now so I may need to turn down the order or charge $2550.00 for the gun.
NOW AT $1750.00, YOU CAN NOT REPRODUCE THIS GUN FOR THE PRICE NOW! At the end of this listing I will not list it again, it's going back into the safe!
SOLD
|
Click Photo to Enlarge
|
Guns International #: 100556179
Category - Smith & Wesson Revolvers - Model 19
- .357 Magnum Revolvers
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Old Centurion
Company: NewCenturion Arms Member Since: 11/19/13
First Name: Gary
Last Name: Bryant
State:
Florida
Zip: 34442
Country: United States
Phone:
(352) 601-6942
Active Listings: 0
Total Listings: 100
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
Buyer pays shipping on return Payment Methods: Postal Money Order,cashiers check
Smith & Wesson Colt Python Custom- SMOLT-SMYTHON 6
Description: Can't afford a Colt Python?? here is your answer! This is a custom made S&W Model 19 pined barrel recessed cylinder complete with target hammer, target trigger white outline sight, red ramp front. The Colt Python barrel has been perfectly machined and threaded to fit the Smith frame, the ejector rod housing has been milled out for the S&W rod. A crane lock had been installed for secure cylinder lock up. The S&W action has been hand tuned and is super smooth with a clean break for single action.I didn't go all the way as some shooters like to put their own desired "trigger pull" so there is more than enough stock left for that. The superb Industrial Hard Chrome finish was done in bright.I fired the gun before it was plated and it is VERY accurate, I will say because of the barrel to cylinder tolerance lead bullets will jam up fairly quickly on the cylinder, shoot jacketed or plated bullets only. Please ask questions before you bid. $25 Flat rate shipping with insurance to the lower 48. Sold by individual to FFL only. Parts cost: S&W Mod. 19-pinned & recessed $800 Python barrel $500 Target Hammer Trigger $150 N frame sight w/o $125 Hand made Rosewood grips $75 Industrial hard chrome bright $225 TOTAL is $1875.00 with no labor cost or profit! NOTE: I just function fired this revolver with 6 magnums and 6 38 spl. 3 magnum lead heads all factory ammo. Acuracy is amazing but as I knew it started to bind the cylinder after the 3 lead bullets. I HAVE JUST raised the price on this gun after trying to obtain parts to build a similar gun but with blueing and other options and priced just components that exceed $1900.00 now so I may need to turn down the order or charge $2550.00 for the gun. NOW AT $1750.00, YOU CAN NOT REPRODUCE THIS GUN FOR THE PRICE NOW! At the end of this listing I will not list it again, it's going back into the safe! SOLD |
Click Photo to Enlarge
Guns International #: 100556179
Category - Smith & Wesson Revolvers - Model 19
- .357 Magnum Revolvers
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Old Centurion
Company: NewCenturion Arms
Company: NewCenturion Arms
Member Since: 11/19/13
First Name: Gary
Last Name: Bryant
State:
Florida
Zip: 34442
Country: United States
Phone:
(352) 601-6942
Active Listings: 0
Total Listings: 100
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
Buyer pays shipping on return
Buyer pays shipping on return
Payment Methods: Postal Money Order,cashiers check
Smith & Wesson Colt Python Custom- SMOLT-SMYTHON 6
Description:
Can't afford a Colt Python?? here is your answer! This is a custom made S&W Model 19 pined barrel recessed cylinder complete with target hammer, target trigger white outline sight, red ramp front. The Colt Python barrel has been perfectly machined and threaded to fit the Smith frame, the ejector rod housing has been milled out for the S&W rod. A crane lock had been installed for secure cylinder lock up. The S&W action has been hand tuned and is super smooth with a clean break for single action.I didn't go all the way as some shooters like to put their own desired "trigger pull" so there is more than enough stock left for that. The superb Industrial Hard Chrome finish was done in bright.I fired the gun before it was plated and it is VERY accurate, I will say because of the barrel to cylinder tolerance lead bullets will jam up fairly quickly on the cylinder, shoot jacketed or plated bullets only. Please ask questions before you bid. $25 Flat rate shipping with insurance to the lower 48. Sold by individual to FFL only.
Parts cost: S&W Mod. 19-pinned & recessed $800
Python barrel $500
Target Hammer Trigger $150
N frame sight w/o $125
Hand made Rosewood grips $75
Industrial hard chrome bright $225
TOTAL is $1875.00 with no labor cost or profit!
NOTE: I just function fired this revolver with 6 magnums and 6 38 spl. 3 magnum lead heads all factory ammo. Acuracy is amazing but as I knew it started to bind the cylinder after the 3 lead bullets.
I HAVE JUST raised the price on this gun after trying to obtain parts to build a similar gun but with blueing and other options and priced just components that exceed $1900.00 now so I may need to turn down the order or charge $2550.00 for the gun.
NOW AT $1750.00, YOU CAN NOT REPRODUCE THIS GUN FOR THE PRICE NOW! At the end of this listing I will not list it again, it's going back into the safe!
SOLD
Description:
Can't afford a Colt Python?? here is your answer! This is a custom made S&W Model 19 pined barrel recessed cylinder complete with target hammer, target trigger white outline sight, red ramp front. The Colt Python barrel has been perfectly machined and threaded to fit the Smith frame, the ejector rod housing has been milled out for the S&W rod. A crane lock had been installed for secure cylinder lock up. The S&W action has been hand tuned and is super smooth with a clean break for single action.I didn't go all the way as some shooters like to put their own desired "trigger pull" so there is more than enough stock left for that. The superb Industrial Hard Chrome finish was done in bright.I fired the gun before it was plated and it is VERY accurate, I will say because of the barrel to cylinder tolerance lead bullets will jam up fairly quickly on the cylinder, shoot jacketed or plated bullets only. Please ask questions before you bid. $25 Flat rate shipping with insurance to the lower 48. Sold by individual to FFL only.
Parts cost: S&W Mod. 19-pinned & recessed $800
Python barrel $500
Target Hammer Trigger $150
N frame sight w/o $125
Hand made Rosewood grips $75
Industrial hard chrome bright $225
TOTAL is $1875.00 with no labor cost or profit!
NOTE: I just function fired this revolver with 6 magnums and 6 38 spl. 3 magnum lead heads all factory ammo. Acuracy is amazing but as I knew it started to bind the cylinder after the 3 lead bullets.
I HAVE JUST raised the price on this gun after trying to obtain parts to build a similar gun but with blueing and other options and priced just components that exceed $1900.00 now so I may need to turn down the order or charge $2550.00 for the gun.
NOW AT $1750.00, YOU CAN NOT REPRODUCE THIS GUN FOR THE PRICE NOW! At the end of this listing I will not list it again, it's going back into the safe!
SOLD
Guns International #: 100556179
Guns International #: 100556179
Category - Smith & Wesson Revolvers - Model 19
- .357 Magnum Revolvers
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Old Centurion
Company: NewCenturion Arms
Company: NewCenturion Arms
Member Since: 11/19/13
First Name: Gary
Last Name: Bryant
State:
Florida
Zip: 34442
Country: United States
Phone:
(352) 601-6942
Active Listings: 0
Total Listings: 100
Seller Type: Private Seller
Return Policy: 3 day inspection and return policy on used guns and accessories.
Buyer pays shipping on return
Buyer pays shipping on return
Payment Methods: Postal Money Order,cashiers check
Smith & Wesson Colt Python Custom- SMOLT-SMYTHON 6
Description:
Can't afford a Colt Python?? here is your answer! This is a custom made S&W Model 19 pined barrel recessed cylinder complete with target hammer, target trigger white outline sight, red ramp front. The Colt Python barrel has been perfectly machined and threaded to fit the Smith frame, the ejector rod housing has been milled out for the S&W rod. A crane lock had been installed for secure cylinder lock up. The S&W action has been hand tuned and is super smooth with a clean break for single action.I didn't go all the way as some shooters like to put their own desired "trigger pull" so there is more than enough stock left for that. The superb Industrial Hard Chrome finish was done in bright.I fired the gun before it was plated and it is VERY accurate, I will say because of the barrel to cylinder tolerance lead bullets will jam up fairly quickly on the cylinder, shoot jacketed or plated bullets only. Please ask questions before you bid. $25 Flat rate shipping with insurance to the lower 48. Sold by individual to FFL only.
Parts cost: S&W Mod. 19-pinned & recessed $800
Python barrel $500
Target Hammer Trigger $150
N frame sight w/o $125
Hand made Rosewood grips $75
Industrial hard chrome bright $225
TOTAL is $1875.00 with no labor cost or profit!
NOTE: I just function fired this revolver with 6 magnums and 6 38 spl. 3 magnum lead heads all factory ammo. Acuracy is amazing but as I knew it started to bind the cylinder after the 3 lead bullets.
I HAVE JUST raised the price on this gun after trying to obtain parts to build a similar gun but with blueing and other options and priced just components that exceed $1900.00 now so I may need to turn down the order or charge $2550.00 for the gun.
NOW AT $1750.00, YOU CAN NOT REPRODUCE THIS GUN FOR THE PRICE NOW! At the end of this listing I will not list it again, it's going back into the safe!
SOLD
Description:
Can't afford a Colt Python?? here is your answer! This is a custom made S&W Model 19 pined barrel recessed cylinder complete with target hammer, target trigger white outline sight, red ramp front. The Colt Python barrel has been perfectly machined and threaded to fit the Smith frame, the ejector rod housing has been milled out for the S&W rod. A crane lock had been installed for secure cylinder lock up. The S&W action has been hand tuned and is super smooth with a clean break for single action.I didn't go all the way as some shooters like to put their own desired "trigger pull" so there is more than enough stock left for that. The superb Industrial Hard Chrome finish was done in bright.I fired the gun before it was plated and it is VERY accurate, I will say because of the barrel to cylinder tolerance lead bullets will jam up fairly quickly on the cylinder, shoot jacketed or plated bullets only. Please ask questions before you bid. $25 Flat rate shipping with insurance to the lower 48. Sold by individual to FFL only.
Parts cost: S&W Mod. 19-pinned & recessed $800
Python barrel $500
Target Hammer Trigger $150
N frame sight w/o $125
Hand made Rosewood grips $75
Industrial hard chrome bright $225
TOTAL is $1875.00 with no labor cost or profit!
NOTE: I just function fired this revolver with 6 magnums and 6 38 spl. 3 magnum lead heads all factory ammo. Acuracy is amazing but as I knew it started to bind the cylinder after the 3 lead bullets.
I HAVE JUST raised the price on this gun after trying to obtain parts to build a similar gun but with blueing and other options and priced just components that exceed $1900.00 now so I may need to turn down the order or charge $2550.00 for the gun.
NOW AT $1750.00, YOU CAN NOT REPRODUCE THIS GUN FOR THE PRICE NOW! At the end of this listing I will not list it again, it's going back into the safe!
SOLD
Guns International Advertising Policy
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classifed advertising of guns, gun related items and services for sale online. If you are looking to buy guns or sell guns, you have come to the right place. GunsInternational.com gun classifieds currently have over 100,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classifed advertising of guns, gun related items and services for sale online. If you are looking to buy guns or sell guns, you have come to the right place. GunsInternational.com gun classifieds currently have over 100,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
Listings
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
©2006 - 2025 all rights reserved. | Guns International.com | V4.1 ww3
Privacy Policy
User Agreement
FAQs
Contact Us
©2006 - 2025 all rights reserved.
Guns International.com | V4.1 ww3
Guns International.com | V4.1 ww3