BHMasterpiece 9mm SFS Hi-Power, "Browning" Hi-Power produced by Arcus in Bulgaria, Customized in BHCustomShop / BHSpringSolutions
Guns International #: 102463557 Seller's Inventory #: 1010
Category: Browning Pistols - Hi-Power - 9mm Pistols

Seller's Information
When emailing or calling sellers direct, please mention that you saw their listing on GunsInternational.com
Verified Seller
Seller: The Hi Power Medic, LLC
Company: The Hi Power Medic, LLC
Member Since: 9/20/23
State: Indiana
Zip: 46127
Country: United States
Premium Seller
Number of Active Listings: 10
Total Number of Listings: 41
Seller: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns.

Payment Types Accepted: Visa, Mastercard, Discover, Money Order, AMEX



Description:
BHMasterpiece 9mm SFS Hi-Power, "Browning" Hi-Power produced by Arcus in Bulgaria, Customized in BHCustomShop / BHSpringSolutions

Produced from a New Arcus 94 Hi-Power

Description:
From the World's Hi-Power Specialists!  BHSpringSolutions LLC / BHSpringSolutions / BHCustomShop Service Dept.

BHMasterpiece 9mm SFS Hi-Power. 

Slide/Frame: Manufactured by Arcus Co in Bulgaria

FINISH: BHPerformance BLACK Slide by TC Custom Coatings LLC

ALL COMPONENTS INSTALLED IN SLIDE/FRAME ARE NEW FROM BHSpringSolutions:

Built and Tuned with BHSpringSolutions Optimized Springs for Hi-Powers 

BHAdavnced SFS (Safety-Fast-Shooting) Operating System brings 20 Benefits to the Hi-Power design: 
The 20 Benefits of the FAST SAFETY (SFS) System for Hi Powers and Hi Power Clones
  •  SFS System allows the Hi Power to be carried Condition 1, but in a Hammer Forward state.  When the Manual Safety (termed the “Cocking Lever” with the SFS system) is swiped off, the hammer simultaneously springs to the cocked/ready to fire position by work of a Spring.
  •  Because of the almost flat hammer profile and hammer-forward “carry” position of the hammer, the Hi Power can be carried Condition 1 and eliminate common “snagging” in clothing of a cocked Hi Power hammer.
  •  Most comfortable hammer for Carry (doesn’t dig into your side-fat when carried IWB on the hip) Makes the Hi Power feel more like a Striker-Fired Concealed Carry handgun, except better because of the Hi Powers thin profile.
  •  Best Solution for More Sure and Fast One Handed Deployment of the Hi Power.
  •  Enables “Hammer Forward Carry”, (like a DA/SA handgun), with the superior benefit of every shot being the same Single Action Trigger Pull.
  •  Adds an Extended Slide Stop/Slide Release…Making all the Hi Powers Controls easily within reach of the thumb of the shooting hand, without releasing or adjusting grip on the Hi Power.
  •  Adds Ambidextrous Safety to older Hi Powers with one-sided safety.
  •  Better / Lighter Trigger Pull – Many SFS users have reported a Trigger Break Reduction of ½ – 1 ¼ lbs after installing SFS.  This is attributable to two things.  The SFS Main Spring is 30 lb, and dimensionally shorter than the FN/Browning OEM 32 lb Main Spring.  Less pressure on the Sear/Hammer Tooth Relationship will typically create a reduction in trigger pull weight.
  •  Cleaner/Crisper Trigger Break – The SFS System is a group of parts and springs that replace certain parts of the Traditional Operating System.  Two parts replaced are the Sear and Hammer.  Typical feedback from gunsmiths: “The SFS Hammer and Sear are extremely well made, and typically superior to the FN/Browning OEM Sear/Hammer.  It is not uncommon for a non-modified Browning trigger pull to go like this:  “Take up…….wall……you think you’re at the “break” of the trigger……then you pull a little more into a “zone” that allows the trigger to pull a little more and yet still the trigger doesn’t break…..so with more pressure……..FINALLY!……..the hammer falls!”  The SFS Sear/Hammer set typically eliminates THAT! (Note: All results do vary slightly)
  •  Adds a “Drop Safety” to the Hi Power (that doesn’t degrade trigger pull!)  When in the “On Safe” position, both Slide and Hammer are locked.
  •  Persons who miss-out on the benefits of Hi Power Carry because they don’t like “Cocked and Locked” Carry, for any reason, can usually embrace Condition 1 SFS Hammer Forward Carry.
  •  The SFS System Replaces Three Springs in a Hi Power: Hammer (Main) Spring, Safety Lever Spring, the flat metal Sear Spring, and adds a new “Return Spring” that is the cause of the Hammer’s Cocking Action when the Safety is swiped off.  BHSpringSolutions LLC manufactures Optimized SFS Main Spring, Cocking Lever Spring, and Return Spring.  In the opinion of BHSpringSolutions LLC, the design of SFS springs is appropriate for the jobs these springs perform and none of these springs could be considered “over-worked”.
  •  Seeing the Hammer Forward provides visual confirmation that the Hi Power is “on safe”.  Eliminates all “THAT HAMMER IS COCKED!” concerns.
  •  Transition to SFS is seamless for Cocked and Locked carriers of the Hi Power.
  •  Safe Condition 1 Carry, easily embraced by Hi Power owners currently using a “Condition 2 or Condition 3 Carry.  (Also safer because of the “no-snag” hammer.)
  •  MAY buy you a few extra seconds to access your Back-Up Weapon if an attempted Gun Grab is successful and your Hi Power ends up in a bad-guys hand.  The SFS System is different and may cause momentary confusion for an attacker who gains control or your Hi Power.  In the SFS Carry Condition 1, the Hammer is Locked and cannot be manually cocked.  The Slide is Locked and cannot be racked.  When the Safety is disengaged, it causes the hammer to spring rearward – again, different, and may cause momentary confusion for an attacker in a Gun Grab.  At a minimum, in a “Gun Grab” situation, your Hi Power might be more difficult for an attacker to deploy than any “non-manual-safety” semi-auto pistol.  SFS has Tactical Safety Advantages over ANY other operating system on any handgun.
  •  Fastest Hi Power Field Strip procedure.  User no longer needs to lock back the slide, to remove the Slide Stop/Slide Release.  Simply push out Slide Stop wh while applying slight upward pressure on the Slide Stop.
  •  If shooter tends to “ride the manual safety” with shooting thumb during shooting, nothing changes.  But, since the SFS Manual Safety cannot be “cammed up” with the thumb (only by manually pushing forward the hammer), SFS eliminates the chance of the thumb riding up under the safety and inadvertently engaging the safety.
  •  Ambidextrous Magazine Catch (Included with Tactical Version)
  •  Decocking the hammer no longer requires a dangerous maneuver of pulling the trigger and easing the hammer forward.
BHAdvanced Hi-Power THREADED Barrel: 
The BHPerformance Advanced Match Grade 9mm Hi-Power Barrel.  Another major moment of Advancement for the Hi-Power design from BHSpringSolutions LLC.
The New BHPerformance Advanced Barrel for Hi-Powers is the Smoothest Feeding, Most Accurate, Most Reliable, Most Feature-Packed and Highest Quality Barrel ever made by ANY manufacturer of a Hi-Power Barrel!
–          Lifetime Quality: Made from the highest quality steel ever used to manufacture a Hi-Power Barrel
–          Superior Construction: 1 piece instead of 2-Pieces joined together like FN/Browning produced
–          Superior Accuracy: It has the tight 1:10 Twist Rate used by FN/Browning (not 1:16 as manufactured by many aftermarket HP Barrel producers), and “Left                            Hand Twist” (holds better accuracy for Right Handed Shooters)
–          Has an expanded chamber entrance with a precision “radius” into the chamber making the feeding of ammunition buttery smooth (you may wonder if you                            really chambered a round when you rack the slide)
–          It has a “cut-out” (ejection port) on the right side of the chamber entrance that serves to provide enhanced clearance/margin for ejecting empty shell casings
–          Ejection Port “cut-out” allows visual confirmation that a round is chambered
–          Stronger Barrel Cam Lug Construction

BHAdvanced Recoil-Buffering Recoil Spring Guide Rod
Enhances Shooter’s Accuracy
Enhances Shooter’s Follow-Up Efficiency (Speed)
Enhances Shooter’s Control of the Hi-Power
Enhances Shooter’s Comfort
Increases Shooter’s Confidence
Extends Hi-Power Service Life

BHAdvanced Trigger Sub-Assembly with Wide Serrated Trigger BHAdvanced Magazine-Eject-Assist
  • Refined geometry repositions the trigger “shoe” in the Hi-Powers’ trigger guard and affords a more straight-back trigger pull and reset motion more characteristic of John Browning’s trigger designs
  • Wider Triggers that engages with more surface area of the trigger finger.
  • Elimination of the Magazine Disconnect
  • Re-design and refinement of the geometry of the Hi-Powers’ Trigger Pawl (lever) minimizes metal-to-metal resistance of the Trigger Pawl’s relationship with the Hi-Powers’ grip frame and optimizes the engagement point with the Hi-Powers’ Sear Connecting Lever (Sear Lever).
  • Most Authoritative Hi-Power Trigger Reset Possible
  • Eliminates conflict of the Trigger Return Spring with the Trigger Pin (found in all original design Hi-Power triggers
BHAdvanced Magazine-Eject-Assist: Magazines Eject with Authority because of the BH Innovation of the Magazine Eject-Assist-Spring

BH-Tuned 4.5 lbs Trigger Break with excellent authoritative reset

BHAdvanced Convertible Tactical-Ambi-Mag-Catch
Easier to Activate Faster-Mag-Changes
Can be Single-Side or Ambidextrous

BHMastersGrips Heirloom-Grade Walnut Grip Panels
 THE WOOD of BHSS Heirloom-Grade MastersGrips:
The Highest known Grade of Walnut, on our planet – some “wavy grained”, some “tiger grained”, etc.  High grades of Walnut are available worldwide, but this ultra-high-grade of Walnut is currently only available in Bulgaria and Turkey – and, it is expensive.  The result this Walnut produces is just jaw-dropping eye-popping gorgeous.  In the opinion of BHSpringSolutions, these are the grip panels for the Hi Power that FN and Browning and every other Hi Power manufacturer from history, should have produced, and never did.  The finished quality of these grips exceeds even the gloss walnut that Browning is so famous for in their shotguns and rifles.
The Finish of These BHSS Heirloom-Grade MastersGrips:
It’s called “BHSS-Hi-Polished-Finish”.  Multiple layers of Varnish are used to coat the surface followed by extensive polishing work. The entire finishing process required for each pair of Heirloom-Grade MastersGrips requires one week of applications and polishing with each additional layer providing additional protection to the underlying surface. When complete, the BHSS-Hi-Polished-Finish provides a waterproof, stain resistant, scratch resistant, glossy surface.  Unlike some gloss walnut finishes that love to show scratches and wear, the BHSS-Hi-Polished-Finish result is as tough as it is beautiful.
Do we actually suggest using Heirloom-Grade MastersGrips for actual shooting?  YES!!!!! 
BHSS Heirloom-Grade MastersGrips are made with the same contour and center-of-grip-swell design (like a 1911 grip) that have made BHSS Hi-PowerGrips famous with Hi Power enthusiasts because of their excellence in “feel” and “control” of the Hi-Power pistol.  Shooting with grips this beautiful?  That’s your call, of course – we’ve made them to be as Tactically Superior as they are beautiful.
The BHSS  Heirloom Grade MastersGrips exceed the quality and beauty of any Hi-Power grips made by any other producer of Hi-Power Grips.

BHAdvanced Type 1 Safety Sear Lever w/ Spring
Resolves the primary cause of "Hammer-Follow" in the Hi-Power design.

New Browning Factory Hi-Power Components: 
Extractor
Firing Pin
Firing Pin Retaining Plate

All Roll Pins, Solid Pins & Grip Screws Replaced with New Hi-Power Pins from BHSpringSolutions

Mecgar Magazines: (3)
17 Round Nickel (with Mecgar +2 Base Plate, Convertible to 15 Round With Flush Nickel Base Plate)
15 Round Nickel 
13 Round Nickel 
Includes 1 Stainless BHAdvanced Finger-Rest Magazine Base Plate


SHIPPING NOTES AND FFL Business-Relationship Disclosure: 
FFL USPS PRIORITY INSURED SHIPPING: $47.00  (Insured Amount: $2,500.00)

BHCustomShop Service Dept is a partner at TC Custom Coatings LLC (FFL).  All BHMasterpiece and BHAdvancedCarry Firearms are produced by BHSpringSolutions LLC / BHCustomShop at TC Custom Coatings LLC. 

TC Custom Coatings LLC is an OEM Metal Finisher to Fireams Manufacturers and Applicator of BHFinishes / BHRefinishes per BHSpringSolutions' Requirements & Specifications.   Firearm that is the subject of this listing is in READY-TO-DELIVER Status in TC Custom Coatings LLC's Inventory.

New Owner of this BHMasterpiece Hi-Power is invited to Schedule an Orientation with a BHSpringSolutions' Representative to Review all functions and maintenance best-practices for this firearm.  

SOLD

Handgun Caliber: 9x19mm Parabellum (9mm Luger, 9x19mm NATO)
Condition: NEW