to Favorites
1 of 15
2 of 15
3 of 15
4 of 15
5 of 15
6 of 15
7 of 15
8 of 15
9 of 15
10 of 15
11 of 15
12 of 15
13 of 15
14 of 15
15 of 15
Your Session is Ending
The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
Thompson Center Contender Multi-Barrel Set, 6 Barrels, 10” and 14”
Thompson Center Contender Multi-Barrel Set, 6 Barrels, 10” and 14”
Click Photo to Enlarge
Guns International #: 102109118
Seller's Inventory #: 2210-0118
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Shooter's Supply, LLC.
Member Since: 3/16/16
First Name: Patrick
Last Name: Brown
State:
Tennessee
Zip: 37343
Country: United States
Phone:
(423) 875-4868
Active Listings: 78
Total Listings: 1350
Seller Type: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns and accessories. No returns on new firearms.
We normally ship USPS Priority Mail which should be 2-day ship. Shipping is actual cost with a minimum of $30.00 for pistols and $50.00 for rifles/shotguns to ship to most of the 48 contiguous states. Shipping to Alaska may require an extra fee. Shipping insurance is available upon request for an extra fee. We cannot do international sales. As of November 2019, we no longer ship guns to California and Hawaii.
We normally ship USPS Priority Mail which should be 2-day ship. Shipping is actual cost with a minimum of $30.00 for pistols and $50.00 for rifles/shotguns to ship to most of the 48 contiguous states. Shipping to Alaska may require an extra fee. Shipping insurance is available upon request for an extra fee. We cannot do international sales. As of November 2019, we no longer ship guns to California and Hawaii.
Payment Methods: Visa, Master Card, American Express, USPS Money Order. NO CREDIT CARD FEES!!!
About Us: We are a small family owned business located in Hixson, Tennessee. Do you have firearms at home collecting dust? We have a lively consignment business. Our fee is 20% with a $50 minimum. Firearms are consigned for a an average period of 180 days but the length of period is negotiable. We also do handgun carry permit classes for the state of Tennessee. We have a nice indoor shooting range with reasonable rates. Please check us out at shooterssupply.
Thompson Center Contender Multi-Barrel Set, 6 Barrels, 10” and 14”
Description:
The concept of having one firearm that can be rechambered from one cartridge to another by simply swapping the barrel has always had an allure to it for many sportsman and the Thompson Center Contender certainly has its admirers. Another plus for the Contender is the large number of aftermarket accessories available. These include such things as spare barrels in a variety of lengths and contours, alternative furniture made of different types of wood or synthetic materials, and a large range of scopes and other optics. The example shown here is currently chambered for the venerable .22 Hornet. The .22 Hornet was created by Winchester in 1930 after experiments with .22 caliber cartridges in the 1920’s. Producing the Hornet was a bold move on Winchester’s part, as no guns were yet chambered for it and it was not until 1932 that and firearms manufacturer began production of a rifle chambered for it. Even nearly 100 years later, the .22 Hornet is still in production and a few gun manufacturers still chamber rifles for it. The cartridge sits in a good place in the line-up of .22 caliber cartridges, filling the gap between the .22 Magnum and the .223 Remington. If this does not shoot the owner’s fancy, there are many five other barrels that come with this pistol, each chambered for a different cartridge. Including the .22 Hornet barrel, there are three 10” barrels and three 14” barrels. One of the 10” barrels is chambered for the classic .357 Magnum. A Weaver scope base, rings, and a Tasco Pro Point red dot have been installed. The front sight is retained. The second 10” barrel is chambered for the .41 Remington Magnum. It is equipped with the factory iron sights. The first Super 14 barrel is chambered for the 7-30 Waters cartridge. This is basically the .30-30 Winchester necked down to .284 caliber. The barrel is drilled and tapped for a Weaver base. There is only one dovetail lock in the forward dovetail or slot on the bottom of the barrel. In order to use it with the present wood furniture, the dovetail lock will need to be moved to the rear. The second Super 14 barrel is chambered for the .22 Long Rifle and like the .357 barrel, features a base, rings, and a Tasco Pro Point. The final Super 14 barrel is chambered for the .17 Hornady Magnum Rimfire (HMR) cartridge. It is equipped with a Leupold base, rings, and a Tasco 1.25-4x scope. There are of course, many aftermarket options available for the Contender. Such options include the .22 LR, .223 Rem, .22-250, .243 Winchester, .25-06 Rem, 6.5 Creedmoor, .270 Win, .280 Rem, 7mm-08, .30-06 Springfield, 308 Win, .300 Win Mag, .35 Remington, .35 Whelen, .44 Magnum, and even the .45-70 Gov’t. This example is a Generation 1 Contender, meaning the action must be opened to re-cock if the hammer has been pulled back and then lowered. The pistol has seen some amount of use. Most of the barrels exhibit a small sliver of finish loss on each side due to contact with the fore arm. Otherwise, they retain the majority of their bluing. The receiver exhibits 98 percent or better of its finish. The wood furniture has the usual handling wear, with a few dimples on the bottom of the fore arm. The bore or each barrel is in excellent shape with no rust or pitting. Overall, this set would make a great starting point for some looking to get into single-shot pistol or benchrest competitions.
SOLD
Rifle Caliber: 7-30 Waters
Handgun Caliber: .17 HMR, .22 Long Rifle, .357 Magnum, .41 Remington Magnum, .22 Hornet
Manufacturer: Thompson Center
Model: Contender
Serial Number: 308813
Bore: Rifled, varying twists
Ejectors: Manual ejection
Condition: Good to Excellent
Barrels: 6
Barrel Type: Heavy
Action: Single-shot, break-open
Triggers: Single, serrated
Stock: Wood and synthetic
Fore End: Wood
Finish: Blued
Sights: 41 Mag Bbl.: Adj. rear sight, ramped blade front sight, sight radius 9.0 in. (228 mm), .22 Hornet: TC Arms 4RP 4x32 scope, .357/.22LR barrels: Tasco Pro Point, 17HMR: Tasco 1.25-4x
Extras: See description
Description:
The concept of having one firearm that can be rechambered from one cartridge to another by simply swapping the barrel has always had an allure to it for many sportsman and the Thompson Center Contender certainly has its admirers. Another plus for the Contender is the large number of aftermarket accessories available. These include such things as spare barrels in a variety of lengths and contours, alternative furniture made of different types of wood or synthetic materials, and a large range of scopes and other optics. The example shown here is currently chambered for the venerable .22 Hornet. The .22 Hornet was created by Winchester in 1930 after experiments with .22 caliber cartridges in the 1920’s. Producing the Hornet was a bold move on Winchester’s part, as no guns were yet chambered for it and it was not until 1932 that and firearms manufacturer began production of a rifle chambered for it. Even nearly 100 years later, the .22 Hornet is still in production and a few gun manufacturers still chamber rifles for it. The cartridge sits in a good place in the line-up of .22 caliber cartridges, filling the gap between the .22 Magnum and the .223 Remington. If this does not shoot the owner’s fancy, there are many five other barrels that come with this pistol, each chambered for a different cartridge. Including the .22 Hornet barrel, there are three 10” barrels and three 14” barrels. One of the 10” barrels is chambered for the classic .357 Magnum. A Weaver scope base, rings, and a Tasco Pro Point red dot have been installed. The front sight is retained. The second 10” barrel is chambered for the .41 Remington Magnum. It is equipped with the factory iron sights. The first Super 14 barrel is chambered for the 7-30 Waters cartridge. This is basically the .30-30 Winchester necked down to .284 caliber. The barrel is drilled and tapped for a Weaver base. There is only one dovetail lock in the forward dovetail or slot on the bottom of the barrel. In order to use it with the present wood furniture, the dovetail lock will need to be moved to the rear. The second Super 14 barrel is chambered for the .22 Long Rifle and like the .357 barrel, features a base, rings, and a Tasco Pro Point. The final Super 14 barrel is chambered for the .17 Hornady Magnum Rimfire (HMR) cartridge. It is equipped with a Leupold base, rings, and a Tasco 1.25-4x scope. There are of course, many aftermarket options available for the Contender. Such options include the .22 LR, .223 Rem, .22-250, .243 Winchester, .25-06 Rem, 6.5 Creedmoor, .270 Win, .280 Rem, 7mm-08, .30-06 Springfield, 308 Win, .300 Win Mag, .35 Remington, .35 Whelen, .44 Magnum, and even the .45-70 Gov’t. This example is a Generation 1 Contender, meaning the action must be opened to re-cock if the hammer has been pulled back and then lowered. The pistol has seen some amount of use. Most of the barrels exhibit a small sliver of finish loss on each side due to contact with the fore arm. Otherwise, they retain the majority of their bluing. The receiver exhibits 98 percent or better of its finish. The wood furniture has the usual handling wear, with a few dimples on the bottom of the fore arm. The bore or each barrel is in excellent shape with no rust or pitting. Overall, this set would make a great starting point for some looking to get into single-shot pistol or benchrest competitions.
SOLD
Rifle Caliber: 7-30 Waters
Handgun Caliber: .17 HMR, .22 Long Rifle, .357 Magnum, .41 Remington Magnum, .22 Hornet
Manufacturer: Thompson Center
Model: Contender
Serial Number: 308813
Bore: Rifled, varying twists
Ejectors: Manual ejection
Condition: Good to Excellent
Barrels: 6
Barrel Type: Heavy
Action: Single-shot, break-open
Triggers: Single, serrated
Stock: Wood and synthetic
Fore End: Wood
Finish: Blued
Sights: 41 Mag Bbl.: Adj. rear sight, ramped blade front sight, sight radius 9.0 in. (228 mm), .22 Hornet: TC Arms 4RP 4x32 scope, .357/.22LR barrels: Tasco Pro Point, 17HMR: Tasco 1.25-4x
Extras: See description
|
Click Photo to Enlarge
|
Guns International #: 102109118
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Shooter's Supply, LLC.
Member Since: 3/16/16
First Name: Patrick
Last Name: Brown
State:
Tennessee
Zip: 37343
Country: United States
Phone:
(423) 875-4868
Active Listings: 78
Total Listings: 1350
Seller Type: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns and accessories. No returns on new firearms.
We normally ship USPS Priority Mail which should be 2-day ship. Shipping is actual cost with a minimum of $30.00 for pistols and $50.00 for rifles/shotguns to ship to most of the 48 contiguous states. Shipping to Alaska may require an extra fee. Shipping insurance is available upon request for an extra fee. We cannot do international sales. As of November 2019, we no longer ship guns to California and Hawaii. Payment Methods: Visa, Master Card, American Express, USPS Money Order. NO CREDIT CARD FEES!!!
About Us: We are a small family owned business located in Hixson, Tennessee. Do you have firearms at home collecting dust? We have a lively consignment business. Our fee is 20% with a $50 minimum. Firearms are consigned for a an average period of 180 days but the length of period is negotiable. We also do handgun carry permit classes for the state of Tennessee. We have a nice indoor shooting range with reasonable rates. Please check us out at shooterssupply.
Thompson Center Contender Multi-Barrel Set, 6 Barrels, 10” and 14”
Description: The concept of having one firearm that can be rechambered from one cartridge to another by simply swapping the barrel has always had an allure to it for many sportsman and the Thompson Center Contender certainly has its admirers. Another plus for the Contender is the large number of aftermarket accessories available. These include such things as spare barrels in a variety of lengths and contours, alternative furniture made of different types of wood or synthetic materials, and a large range of scopes and other optics. The example shown here is currently chambered for the venerable .22 Hornet. The .22 Hornet was created by Winchester in 1930 after experiments with .22 caliber cartridges in the 1920’s. Producing the Hornet was a bold move on Winchester’s part, as no guns were yet chambered for it and it was not until 1932 that and firearms manufacturer began production of a rifle chambered for it. Even nearly 100 years later, the .22 Hornet is still in production and a few gun manufacturers still chamber rifles for it. The cartridge sits in a good place in the line-up of .22 caliber cartridges, filling the gap between the .22 Magnum and the .223 Remington. If this does not shoot the owner’s fancy, there are many five other barrels that come with this pistol, each chambered for a different cartridge. Including the .22 Hornet barrel, there are three 10” barrels and three 14” barrels. One of the 10” barrels is chambered for the classic .357 Magnum. A Weaver scope base, rings, and a Tasco Pro Point red dot have been installed. The front sight is retained. The second 10” barrel is chambered for the .41 Remington Magnum. It is equipped with the factory iron sights. The first Super 14 barrel is chambered for the 7-30 Waters cartridge. This is basically the .30-30 Winchester necked down to .284 caliber. The barrel is drilled and tapped for a Weaver base. There is only one dovetail lock in the forward dovetail or slot on the bottom of the barrel. In order to use it with the present wood furniture, the dovetail lock will need to be moved to the rear. The second Super 14 barrel is chambered for the .22 Long Rifle and like the .357 barrel, features a base, rings, and a Tasco Pro Point. The final Super 14 barrel is chambered for the .17 Hornady Magnum Rimfire (HMR) cartridge. It is equipped with a Leupold base, rings, and a Tasco 1.25-4x scope. There are of course, many aftermarket options available for the Contender. Such options include the .22 LR, .223 Rem, .22-250, .243 Winchester, .25-06 Rem, 6.5 Creedmoor, .270 Win, .280 Rem, 7mm-08, .30-06 Springfield, 308 Win, .300 Win Mag, .35 Remington, .35 Whelen, .44 Magnum, and even the .45-70 Gov’t. This example is a Generation 1 Contender, meaning the action must be opened to re-cock if the hammer has been pulled back and then lowered. The pistol has seen some amount of use. Most of the barrels exhibit a small sliver of finish loss on each side due to contact with the fore arm. Otherwise, they retain the majority of their bluing. The receiver exhibits 98 percent or better of its finish. The wood furniture has the usual handling wear, with a few dimples on the bottom of the fore arm. The bore or each barrel is in excellent shape with no rust or pitting. Overall, this set would make a great starting point for some looking to get into single-shot pistol or benchrest competitions. SOLD Rifle Caliber: 7-30 Waters Handgun Caliber: .17 HMR, .22 Long Rifle, .357 Magnum, .41 Remington Magnum, .22 Hornet Manufacturer: Thompson Center Model: Contender Serial Number: 308813 Bore: Rifled, varying twists Ejectors: Manual ejection Condition: Good to Excellent Barrels: 6 Barrel Type: Heavy Action: Single-shot, break-open Triggers: Single, serrated Stock: Wood and synthetic Fore End: Wood Finish: Blued Sights: 41 Mag Bbl.: Adj. rear sight, ramped blade front sight, sight radius 9.0 in. (228 mm), .22 Hornet: TC Arms 4RP 4x32 scope, .357/.22LR barrels: Tasco Pro Point, 17HMR: Tasco 1.25-4x Extras: See description |
Click Photo to Enlarge
Guns International #: 102109118
Seller's Inventory #: 2210-0118
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Shooter's Supply, LLC.
Member Since: 3/16/16
First Name: Patrick
Last Name: Brown
State:
Tennessee
Zip: 37343
Country: United States
Phone:
(423) 875-4868
Active Listings: 78
Total Listings: 1350
Seller Type: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns and accessories. No returns on new firearms.
We normally ship USPS Priority Mail which should be 2-day ship. Shipping is actual cost with a minimum of $30.00 for pistols and $50.00 for rifles/shotguns to ship to most of the 48 contiguous states. Shipping to Alaska may require an extra fee. Shipping insurance is available upon request for an extra fee. We cannot do international sales. As of November 2019, we no longer ship guns to California and Hawaii.
We normally ship USPS Priority Mail which should be 2-day ship. Shipping is actual cost with a minimum of $30.00 for pistols and $50.00 for rifles/shotguns to ship to most of the 48 contiguous states. Shipping to Alaska may require an extra fee. Shipping insurance is available upon request for an extra fee. We cannot do international sales. As of November 2019, we no longer ship guns to California and Hawaii.
Payment Methods: Visa, Master Card, American Express, USPS Money Order. NO CREDIT CARD FEES!!!
About Us: We are a small family owned business located in Hixson, Tennessee. Do you have firearms at home collecting dust? We have a lively consignment business. Our fee is 20% with a $50 minimum. Firearms are consigned for a an average period of 180 days but the length of period is negotiable. We also do handgun carry permit classes for the state of Tennessee. We have a nice indoor shooting range with reasonable rates. Please check us out at shooterssupply.
Thompson Center Contender Multi-Barrel Set, 6 Barrels, 10” and 14”
Description:
The concept of having one firearm that can be rechambered from one cartridge to another by simply swapping the barrel has always had an allure to it for many sportsman and the Thompson Center Contender certainly has its admirers. Another plus for the Contender is the large number of aftermarket accessories available. These include such things as spare barrels in a variety of lengths and contours, alternative furniture made of different types of wood or synthetic materials, and a large range of scopes and other optics. The example shown here is currently chambered for the venerable .22 Hornet. The .22 Hornet was created by Winchester in 1930 after experiments with .22 caliber cartridges in the 1920’s. Producing the Hornet was a bold move on Winchester’s part, as no guns were yet chambered for it and it was not until 1932 that and firearms manufacturer began production of a rifle chambered for it. Even nearly 100 years later, the .22 Hornet is still in production and a few gun manufacturers still chamber rifles for it. The cartridge sits in a good place in the line-up of .22 caliber cartridges, filling the gap between the .22 Magnum and the .223 Remington. If this does not shoot the owner’s fancy, there are many five other barrels that come with this pistol, each chambered for a different cartridge. Including the .22 Hornet barrel, there are three 10” barrels and three 14” barrels. One of the 10” barrels is chambered for the classic .357 Magnum. A Weaver scope base, rings, and a Tasco Pro Point red dot have been installed. The front sight is retained. The second 10” barrel is chambered for the .41 Remington Magnum. It is equipped with the factory iron sights. The first Super 14 barrel is chambered for the 7-30 Waters cartridge. This is basically the .30-30 Winchester necked down to .284 caliber. The barrel is drilled and tapped for a Weaver base. There is only one dovetail lock in the forward dovetail or slot on the bottom of the barrel. In order to use it with the present wood furniture, the dovetail lock will need to be moved to the rear. The second Super 14 barrel is chambered for the .22 Long Rifle and like the .357 barrel, features a base, rings, and a Tasco Pro Point. The final Super 14 barrel is chambered for the .17 Hornady Magnum Rimfire (HMR) cartridge. It is equipped with a Leupold base, rings, and a Tasco 1.25-4x scope. There are of course, many aftermarket options available for the Contender. Such options include the .22 LR, .223 Rem, .22-250, .243 Winchester, .25-06 Rem, 6.5 Creedmoor, .270 Win, .280 Rem, 7mm-08, .30-06 Springfield, 308 Win, .300 Win Mag, .35 Remington, .35 Whelen, .44 Magnum, and even the .45-70 Gov’t. This example is a Generation 1 Contender, meaning the action must be opened to re-cock if the hammer has been pulled back and then lowered. The pistol has seen some amount of use. Most of the barrels exhibit a small sliver of finish loss on each side due to contact with the fore arm. Otherwise, they retain the majority of their bluing. The receiver exhibits 98 percent or better of its finish. The wood furniture has the usual handling wear, with a few dimples on the bottom of the fore arm. The bore or each barrel is in excellent shape with no rust or pitting. Overall, this set would make a great starting point for some looking to get into single-shot pistol or benchrest competitions.
SOLD
Rifle Caliber: 7-30 Waters
Handgun Caliber: .17 HMR, .22 Long Rifle, .357 Magnum, .41 Remington Magnum, .22 Hornet
Manufacturer: Thompson Center
Model: Contender
Serial Number: 308813
Bore: Rifled, varying twists
Ejectors: Manual ejection
Condition: Good to Excellent
Barrels: 6
Barrel Type: Heavy
Action: Single-shot, break-open
Triggers: Single, serrated
Stock: Wood and synthetic
Fore End: Wood
Finish: Blued
Sights: 41 Mag Bbl.: Adj. rear sight, ramped blade front sight, sight radius 9.0 in. (228 mm), .22 Hornet: TC Arms 4RP 4x32 scope, .357/.22LR barrels: Tasco Pro Point, 17HMR: Tasco 1.25-4x
Extras: See description
Description:
The concept of having one firearm that can be rechambered from one cartridge to another by simply swapping the barrel has always had an allure to it for many sportsman and the Thompson Center Contender certainly has its admirers. Another plus for the Contender is the large number of aftermarket accessories available. These include such things as spare barrels in a variety of lengths and contours, alternative furniture made of different types of wood or synthetic materials, and a large range of scopes and other optics. The example shown here is currently chambered for the venerable .22 Hornet. The .22 Hornet was created by Winchester in 1930 after experiments with .22 caliber cartridges in the 1920’s. Producing the Hornet was a bold move on Winchester’s part, as no guns were yet chambered for it and it was not until 1932 that and firearms manufacturer began production of a rifle chambered for it. Even nearly 100 years later, the .22 Hornet is still in production and a few gun manufacturers still chamber rifles for it. The cartridge sits in a good place in the line-up of .22 caliber cartridges, filling the gap between the .22 Magnum and the .223 Remington. If this does not shoot the owner’s fancy, there are many five other barrels that come with this pistol, each chambered for a different cartridge. Including the .22 Hornet barrel, there are three 10” barrels and three 14” barrels. One of the 10” barrels is chambered for the classic .357 Magnum. A Weaver scope base, rings, and a Tasco Pro Point red dot have been installed. The front sight is retained. The second 10” barrel is chambered for the .41 Remington Magnum. It is equipped with the factory iron sights. The first Super 14 barrel is chambered for the 7-30 Waters cartridge. This is basically the .30-30 Winchester necked down to .284 caliber. The barrel is drilled and tapped for a Weaver base. There is only one dovetail lock in the forward dovetail or slot on the bottom of the barrel. In order to use it with the present wood furniture, the dovetail lock will need to be moved to the rear. The second Super 14 barrel is chambered for the .22 Long Rifle and like the .357 barrel, features a base, rings, and a Tasco Pro Point. The final Super 14 barrel is chambered for the .17 Hornady Magnum Rimfire (HMR) cartridge. It is equipped with a Leupold base, rings, and a Tasco 1.25-4x scope. There are of course, many aftermarket options available for the Contender. Such options include the .22 LR, .223 Rem, .22-250, .243 Winchester, .25-06 Rem, 6.5 Creedmoor, .270 Win, .280 Rem, 7mm-08, .30-06 Springfield, 308 Win, .300 Win Mag, .35 Remington, .35 Whelen, .44 Magnum, and even the .45-70 Gov’t. This example is a Generation 1 Contender, meaning the action must be opened to re-cock if the hammer has been pulled back and then lowered. The pistol has seen some amount of use. Most of the barrels exhibit a small sliver of finish loss on each side due to contact with the fore arm. Otherwise, they retain the majority of their bluing. The receiver exhibits 98 percent or better of its finish. The wood furniture has the usual handling wear, with a few dimples on the bottom of the fore arm. The bore or each barrel is in excellent shape with no rust or pitting. Overall, this set would make a great starting point for some looking to get into single-shot pistol or benchrest competitions.
SOLD
Rifle Caliber: 7-30 Waters
Handgun Caliber: .17 HMR, .22 Long Rifle, .357 Magnum, .41 Remington Magnum, .22 Hornet
Manufacturer: Thompson Center
Model: Contender
Serial Number: 308813
Bore: Rifled, varying twists
Ejectors: Manual ejection
Condition: Good to Excellent
Barrels: 6
Barrel Type: Heavy
Action: Single-shot, break-open
Triggers: Single, serrated
Stock: Wood and synthetic
Fore End: Wood
Finish: Blued
Sights: 41 Mag Bbl.: Adj. rear sight, ramped blade front sight, sight radius 9.0 in. (228 mm), .22 Hornet: TC Arms 4RP 4x32 scope, .357/.22LR barrels: Tasco Pro Point, 17HMR: Tasco 1.25-4x
Extras: See description
Guns International #: 102109118
Seller's Inventory #: 2210-0118
Guns International #: 102109118
Seller's Inventory #: 2210-0118
Seller's Information
When emailing or calling sellers direct,
please mention that you saw their listing on GunsInternational.com
Seller: Shooter's Supply, LLC.
Member Since: 3/16/16
First Name: Patrick
Last Name: Brown
State:
Tennessee
Zip: 37343
Country: United States
Phone:
(423) 875-4868
Active Listings: 78
Total Listings: 1350
Seller Type: FFL Dealer
Return Policy: 3 day inspection and return policy on used guns and accessories. No returns on new firearms.
We normally ship USPS Priority Mail which should be 2-day ship. Shipping is actual cost with a minimum of $30.00 for pistols and $50.00 for rifles/shotguns to ship to most of the 48 contiguous states. Shipping to Alaska may require an extra fee. Shipping insurance is available upon request for an extra fee. We cannot do international sales. As of November 2019, we no longer ship guns to California and Hawaii.
We normally ship USPS Priority Mail which should be 2-day ship. Shipping is actual cost with a minimum of $30.00 for pistols and $50.00 for rifles/shotguns to ship to most of the 48 contiguous states. Shipping to Alaska may require an extra fee. Shipping insurance is available upon request for an extra fee. We cannot do international sales. As of November 2019, we no longer ship guns to California and Hawaii.
Payment Methods: Visa, Master Card, American Express, USPS Money Order. NO CREDIT CARD FEES!!!
About Us: We are a small family owned business located in Hixson, Tennessee. Do you have firearms at home collecting dust? We have a lively consignment business. Our fee is 20% with a $50 minimum. Firearms are consigned for a an average period of 180 days but the length of period is negotiable. We also do handgun carry permit classes for the state of Tennessee. We have a nice indoor shooting range with reasonable rates. Please check us out at shooterssupply.
Thompson Center Contender Multi-Barrel Set, 6 Barrels, 10” and 14”
Description:
The concept of having one firearm that can be rechambered from one cartridge to another by simply swapping the barrel has always had an allure to it for many sportsman and the Thompson Center Contender certainly has its admirers. Another plus for the Contender is the large number of aftermarket accessories available. These include such things as spare barrels in a variety of lengths and contours, alternative furniture made of different types of wood or synthetic materials, and a large range of scopes and other optics. The example shown here is currently chambered for the venerable .22 Hornet. The .22 Hornet was created by Winchester in 1930 after experiments with .22 caliber cartridges in the 1920’s. Producing the Hornet was a bold move on Winchester’s part, as no guns were yet chambered for it and it was not until 1932 that and firearms manufacturer began production of a rifle chambered for it. Even nearly 100 years later, the .22 Hornet is still in production and a few gun manufacturers still chamber rifles for it. The cartridge sits in a good place in the line-up of .22 caliber cartridges, filling the gap between the .22 Magnum and the .223 Remington. If this does not shoot the owner’s fancy, there are many five other barrels that come with this pistol, each chambered for a different cartridge. Including the .22 Hornet barrel, there are three 10” barrels and three 14” barrels. One of the 10” barrels is chambered for the classic .357 Magnum. A Weaver scope base, rings, and a Tasco Pro Point red dot have been installed. The front sight is retained. The second 10” barrel is chambered for the .41 Remington Magnum. It is equipped with the factory iron sights. The first Super 14 barrel is chambered for the 7-30 Waters cartridge. This is basically the .30-30 Winchester necked down to .284 caliber. The barrel is drilled and tapped for a Weaver base. There is only one dovetail lock in the forward dovetail or slot on the bottom of the barrel. In order to use it with the present wood furniture, the dovetail lock will need to be moved to the rear. The second Super 14 barrel is chambered for the .22 Long Rifle and like the .357 barrel, features a base, rings, and a Tasco Pro Point. The final Super 14 barrel is chambered for the .17 Hornady Magnum Rimfire (HMR) cartridge. It is equipped with a Leupold base, rings, and a Tasco 1.25-4x scope. There are of course, many aftermarket options available for the Contender. Such options include the .22 LR, .223 Rem, .22-250, .243 Winchester, .25-06 Rem, 6.5 Creedmoor, .270 Win, .280 Rem, 7mm-08, .30-06 Springfield, 308 Win, .300 Win Mag, .35 Remington, .35 Whelen, .44 Magnum, and even the .45-70 Gov’t. This example is a Generation 1 Contender, meaning the action must be opened to re-cock if the hammer has been pulled back and then lowered. The pistol has seen some amount of use. Most of the barrels exhibit a small sliver of finish loss on each side due to contact with the fore arm. Otherwise, they retain the majority of their bluing. The receiver exhibits 98 percent or better of its finish. The wood furniture has the usual handling wear, with a few dimples on the bottom of the fore arm. The bore or each barrel is in excellent shape with no rust or pitting. Overall, this set would make a great starting point for some looking to get into single-shot pistol or benchrest competitions.
SOLD
Rifle Caliber: 7-30 Waters
Handgun Caliber: .17 HMR, .22 Long Rifle, .357 Magnum, .41 Remington Magnum, .22 Hornet
Manufacturer: Thompson Center
Model: Contender
Serial Number: 308813
Bore: Rifled, varying twists
Ejectors: Manual ejection
Condition: Good to Excellent
Barrels: 6
Barrel Type: Heavy
Action: Single-shot, break-open
Triggers: Single, serrated
Stock: Wood and synthetic
Fore End: Wood
Finish: Blued
Sights: 41 Mag Bbl.: Adj. rear sight, ramped blade front sight, sight radius 9.0 in. (228 mm), .22 Hornet: TC Arms 4RP 4x32 scope, .357/.22LR barrels: Tasco Pro Point, 17HMR: Tasco 1.25-4x
Extras: See description
Description:
The concept of having one firearm that can be rechambered from one cartridge to another by simply swapping the barrel has always had an allure to it for many sportsman and the Thompson Center Contender certainly has its admirers. Another plus for the Contender is the large number of aftermarket accessories available. These include such things as spare barrels in a variety of lengths and contours, alternative furniture made of different types of wood or synthetic materials, and a large range of scopes and other optics. The example shown here is currently chambered for the venerable .22 Hornet. The .22 Hornet was created by Winchester in 1930 after experiments with .22 caliber cartridges in the 1920’s. Producing the Hornet was a bold move on Winchester’s part, as no guns were yet chambered for it and it was not until 1932 that and firearms manufacturer began production of a rifle chambered for it. Even nearly 100 years later, the .22 Hornet is still in production and a few gun manufacturers still chamber rifles for it. The cartridge sits in a good place in the line-up of .22 caliber cartridges, filling the gap between the .22 Magnum and the .223 Remington. If this does not shoot the owner’s fancy, there are many five other barrels that come with this pistol, each chambered for a different cartridge. Including the .22 Hornet barrel, there are three 10” barrels and three 14” barrels. One of the 10” barrels is chambered for the classic .357 Magnum. A Weaver scope base, rings, and a Tasco Pro Point red dot have been installed. The front sight is retained. The second 10” barrel is chambered for the .41 Remington Magnum. It is equipped with the factory iron sights. The first Super 14 barrel is chambered for the 7-30 Waters cartridge. This is basically the .30-30 Winchester necked down to .284 caliber. The barrel is drilled and tapped for a Weaver base. There is only one dovetail lock in the forward dovetail or slot on the bottom of the barrel. In order to use it with the present wood furniture, the dovetail lock will need to be moved to the rear. The second Super 14 barrel is chambered for the .22 Long Rifle and like the .357 barrel, features a base, rings, and a Tasco Pro Point. The final Super 14 barrel is chambered for the .17 Hornady Magnum Rimfire (HMR) cartridge. It is equipped with a Leupold base, rings, and a Tasco 1.25-4x scope. There are of course, many aftermarket options available for the Contender. Such options include the .22 LR, .223 Rem, .22-250, .243 Winchester, .25-06 Rem, 6.5 Creedmoor, .270 Win, .280 Rem, 7mm-08, .30-06 Springfield, 308 Win, .300 Win Mag, .35 Remington, .35 Whelen, .44 Magnum, and even the .45-70 Gov’t. This example is a Generation 1 Contender, meaning the action must be opened to re-cock if the hammer has been pulled back and then lowered. The pistol has seen some amount of use. Most of the barrels exhibit a small sliver of finish loss on each side due to contact with the fore arm. Otherwise, they retain the majority of their bluing. The receiver exhibits 98 percent or better of its finish. The wood furniture has the usual handling wear, with a few dimples on the bottom of the fore arm. The bore or each barrel is in excellent shape with no rust or pitting. Overall, this set would make a great starting point for some looking to get into single-shot pistol or benchrest competitions.
SOLD
Rifle Caliber: 7-30 Waters
Handgun Caliber: .17 HMR, .22 Long Rifle, .357 Magnum, .41 Remington Magnum, .22 Hornet
Manufacturer: Thompson Center
Model: Contender
Serial Number: 308813
Bore: Rifled, varying twists
Ejectors: Manual ejection
Condition: Good to Excellent
Barrels: 6
Barrel Type: Heavy
Action: Single-shot, break-open
Triggers: Single, serrated
Stock: Wood and synthetic
Fore End: Wood
Finish: Blued
Sights: 41 Mag Bbl.: Adj. rear sight, ramped blade front sight, sight radius 9.0 in. (228 mm), .22 Hornet: TC Arms 4RP 4x32 scope, .357/.22LR barrels: Tasco Pro Point, 17HMR: Tasco 1.25-4x
Extras: See description
Guns International Advertising Policy
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classifed advertising of guns, gun related items and services for sale online. If you are looking to buy guns or sell guns, you have come to the right place. GunsInternational.com gun classifieds currently have over 100,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classifed advertising of guns, gun related items and services for sale online. If you are looking to buy guns or sell guns, you have come to the right place. GunsInternational.com gun classifieds currently have over 100,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
Listings
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
©2006 - 2025 all rights reserved. | Guns International.com | V4.1 ww1
Privacy Policy
User Agreement
FAQs
Contact Us
©2006 - 2025 all rights reserved.
Guns International.com | V4.1 ww1
Guns International.com | V4.1 ww1