to Favorites
1 of 15
2 of 15
3 of 15
4 of 15
5 of 15
6 of 15
7 of 15
8 of 15
9 of 15
10 of 15
11 of 15
12 of 15
13 of 15
14 of 15
15 of 15
Your Session is Ending
The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
CZ USA Bren 2 MS Pistol 5.56 NATO 8” New in Box w/SB Brace for sale
CZ USA Bren 2 MS Pistol 5.56 NATO 8” New in Box w/SB Brace for sale
Click Photo to Enlarge
Guns International #: 102830763
Seller's Inventory #: 24090014
Category - CZ
Pistols
- Tactical Pistols
CZ USA Bren 2 MS Pistol 5.56 NATO 8” New in Box w/SB Brace
Description:
The CZ Bren 2 MS is a development of the original 805 Bren. While the 805 was built to a specific set of requirements created by the Czech military, the Bren 2 represents a total overhaul. The focus of the design changes was to reduce the size and weight of both the pistol and rifle versions while improving the modularity. The aluminum receiver has been trimmed down in size while the lower is made from a carbon fiber-reinforced polymer. The pistol version is available in both 5.56 NATO and the 7.62x39 cartridge, with multiple barrel lengths available for each chambering. All variants of the Bren 2 are swappable to different barrel lengths and chamberings. The 5.56 model with 8-inch (actually 8.26”) barrel has the SKU number of 91450. The barrel is cold hammer forged. The rifling consists of conventional lands and grooves, with 6 grooves and a 1:7-inch right-hand twist. This should be more than sufficient to stabilize the heaviest bullets available for the 5.56 NATO and .223 Remington. Equipped with a Spiral three-arm flash hider from the factory, the muzzle is threaded with the common 1/2-28 pitch found on most 5.56 and 9mm firearms, making the installation of other muzzle devices very easy. The aluminum fore end features M-LOK slots and little bolt-on rail-less rail sections. The easy attachment of M-Lok rails allows for the mounting of a variety of accessories such as a flashlight and laser. Like the barrel, the modular fore end can be swapped to different lengths as well. Blending naturally with the fore end, the aluminum upper features a MIL-STD 1913 picatinny rail for mounting a variety of sights. The pistol comes with conventional flip-up sights. Whereas the previous 805 Bren had a reciprocating charging handle, the Bren 2 features a more ergonomical non-reciprocating handle. It can be swapped from left to right to suit the user’s needs. The lower receiver features an AR-style bolt-catch/release that is mirrored on both sides of the firearm, as well as a third catch/release lever located in the inner face of the trigger guard. The magazine release and safety are also ambidextrous. What separates the Bren 2 from most AR15 pistols is the use of a high-quality gas piston system. This allows the Bren 2 to operate much more efficiently and cleaner. The gas block features a switch with three positions, marked 1, 2, and 0. Position 1 is for normal use, 2 is for adverse conditions (i.e. more gas), and 0 is for “off”. The second setting is best for use with lower quality ammo or suppressors. The two-stage trigger will have a pull weight of around 4.5 lbs. The integral polymer pistol grip features a removable backstrap and a storage space. Weight of the Bren 2 MS is a light 5.4 lbs. without the brace. Although it does not come standard, this Bren 2 MS comes brand new with an SB BREN2-01-SB folding brace. The brace is factored into the price. There is a full cleaning kit and one factory-issue 30-round polymer magazine. Needless to say, the Bren 2 will accept a large number of the differing types of 5.56 magazines as long as they are STANAG-compatible. The oil bottle in the cleaning kit has a cap which is cracked but the bottle does not leak. Overall, the Bren 2 MS is a fine AR-style pistol and one suited for a variety of tasks, with the reliability to back it up in the worst of conditions.
Price: $1,824.90
Handgun Caliber: .223 Remington, 5.56x45mm NATO
Manufacturer: CZ USA
Model: Bren 2 MS
Serial Number: F437394
Barrel Length: 8.26 inches (210 mm)
Bore Info: Rifled, 6 grooves, 1:7 inches (1 in 178 mm) RH twist
Ejectors: Auto-ejection
Condition: New in Box
Barrels: Cold Hammer Forged
Barrel Type: Standard
Action: Semi-Auto, Short-stroke gas piston, rotating bolt
Triggers: Two-stage trigger, 4.5 lbs. pull weight
Stock: SB BREN2-01-SB brace (NOT a stock)
Fore End: Alloy handguard with M-Lok slots and little bolt-on rail-less rail sections.
Finish: Matte black
Weight: 5.4 lbs. with empty magazine, 6 lbs. 5.2 oz. w/brace and empty magazine.
Sights: Flip-up front and rear sights, sight radius 12.2 inches (310 mm).
Extras: See description
Case: CZ box
Description:
The CZ Bren 2 MS is a development of the original 805 Bren. While the 805 was built to a specific set of requirements created by the Czech military, the Bren 2 represents a total overhaul. The focus of the design changes was to reduce the size and weight of both the pistol and rifle versions while improving the modularity. The aluminum receiver has been trimmed down in size while the lower is made from a carbon fiber-reinforced polymer. The pistol version is available in both 5.56 NATO and the 7.62x39 cartridge, with multiple barrel lengths available for each chambering. All variants of the Bren 2 are swappable to different barrel lengths and chamberings. The 5.56 model with 8-inch (actually 8.26”) barrel has the SKU number of 91450. The barrel is cold hammer forged. The rifling consists of conventional lands and grooves, with 6 grooves and a 1:7-inch right-hand twist. This should be more than sufficient to stabilize the heaviest bullets available for the 5.56 NATO and .223 Remington. Equipped with a Spiral three-arm flash hider from the factory, the muzzle is threaded with the common 1/2-28 pitch found on most 5.56 and 9mm firearms, making the installation of other muzzle devices very easy. The aluminum fore end features M-LOK slots and little bolt-on rail-less rail sections. The easy attachment of M-Lok rails allows for the mounting of a variety of accessories such as a flashlight and laser. Like the barrel, the modular fore end can be swapped to different lengths as well. Blending naturally with the fore end, the aluminum upper features a MIL-STD 1913 picatinny rail for mounting a variety of sights. The pistol comes with conventional flip-up sights. Whereas the previous 805 Bren had a reciprocating charging handle, the Bren 2 features a more ergonomical non-reciprocating handle. It can be swapped from left to right to suit the user’s needs. The lower receiver features an AR-style bolt-catch/release that is mirrored on both sides of the firearm, as well as a third catch/release lever located in the inner face of the trigger guard. The magazine release and safety are also ambidextrous. What separates the Bren 2 from most AR15 pistols is the use of a high-quality gas piston system. This allows the Bren 2 to operate much more efficiently and cleaner. The gas block features a switch with three positions, marked 1, 2, and 0. Position 1 is for normal use, 2 is for adverse conditions (i.e. more gas), and 0 is for “off”. The second setting is best for use with lower quality ammo or suppressors. The two-stage trigger will have a pull weight of around 4.5 lbs. The integral polymer pistol grip features a removable backstrap and a storage space. Weight of the Bren 2 MS is a light 5.4 lbs. without the brace. Although it does not come standard, this Bren 2 MS comes brand new with an SB BREN2-01-SB folding brace. The brace is factored into the price. There is a full cleaning kit and one factory-issue 30-round polymer magazine. Needless to say, the Bren 2 will accept a large number of the differing types of 5.56 magazines as long as they are STANAG-compatible. The oil bottle in the cleaning kit has a cap which is cracked but the bottle does not leak. Overall, the Bren 2 MS is a fine AR-style pistol and one suited for a variety of tasks, with the reliability to back it up in the worst of conditions.
Price: $1,824.90
Handgun Caliber: .223 Remington, 5.56x45mm NATO
Manufacturer: CZ USA
Model: Bren 2 MS
Serial Number: F437394
Barrel Length: 8.26 inches (210 mm)
Bore Info: Rifled, 6 grooves, 1:7 inches (1 in 178 mm) RH twist
Ejectors: Auto-ejection
Condition: New in Box
Barrels: Cold Hammer Forged
Barrel Type: Standard
Action: Semi-Auto, Short-stroke gas piston, rotating bolt
Triggers: Two-stage trigger, 4.5 lbs. pull weight
Stock: SB BREN2-01-SB brace (NOT a stock)
Fore End: Alloy handguard with M-Lok slots and little bolt-on rail-less rail sections.
Finish: Matte black
Weight: 5.4 lbs. with empty magazine, 6 lbs. 5.2 oz. w/brace and empty magazine.
Sights: Flip-up front and rear sights, sight radius 12.2 inches (310 mm).
Extras: See description
Case: CZ box
Contact Seller
|
Click Photo to Enlarge
|
Guns International #: 102830763
Category - CZ
Pistols
- Tactical Pistols
CZ USA Bren 2 MS Pistol 5.56 NATO 8” New in Box w/SB Brace
Description: The CZ Bren 2 MS is a development of the original 805 Bren. While the 805 was built to a specific set of requirements created by the Czech military, the Bren 2 represents a total overhaul. The focus of the design changes was to reduce the size and weight of both the pistol and rifle versions while improving the modularity. The aluminum receiver has been trimmed down in size while the lower is made from a carbon fiber-reinforced polymer. The pistol version is available in both 5.56 NATO and the 7.62x39 cartridge, with multiple barrel lengths available for each chambering. All variants of the Bren 2 are swappable to different barrel lengths and chamberings. The 5.56 model with 8-inch (actually 8.26”) barrel has the SKU number of 91450. The barrel is cold hammer forged. The rifling consists of conventional lands and grooves, with 6 grooves and a 1:7-inch right-hand twist. This should be more than sufficient to stabilize the heaviest bullets available for the 5.56 NATO and .223 Remington. Equipped with a Spiral three-arm flash hider from the factory, the muzzle is threaded with the common 1/2-28 pitch found on most 5.56 and 9mm firearms, making the installation of other muzzle devices very easy. The aluminum fore end features M-LOK slots and little bolt-on rail-less rail sections. The easy attachment of M-Lok rails allows for the mounting of a variety of accessories such as a flashlight and laser. Like the barrel, the modular fore end can be swapped to different lengths as well. Blending naturally with the fore end, the aluminum upper features a MIL-STD 1913 picatinny rail for mounting a variety of sights. The pistol comes with conventional flip-up sights. Whereas the previous 805 Bren had a reciprocating charging handle, the Bren 2 features a more ergonomical non-reciprocating handle. It can be swapped from left to right to suit the user’s needs. The lower receiver features an AR-style bolt-catch/release that is mirrored on both sides of the firearm, as well as a third catch/release lever located in the inner face of the trigger guard. The magazine release and safety are also ambidextrous. What separates the Bren 2 from most AR15 pistols is the use of a high-quality gas piston system. This allows the Bren 2 to operate much more efficiently and cleaner. The gas block features a switch with three positions, marked 1, 2, and 0. Position 1 is for normal use, 2 is for adverse conditions (i.e. more gas), and 0 is for “off”. The second setting is best for use with lower quality ammo or suppressors. The two-stage trigger will have a pull weight of around 4.5 lbs. The integral polymer pistol grip features a removable backstrap and a storage space. Weight of the Bren 2 MS is a light 5.4 lbs. without the brace. Although it does not come standard, this Bren 2 MS comes brand new with an SB BREN2-01-SB folding brace. The brace is factored into the price. There is a full cleaning kit and one factory-issue 30-round polymer magazine. Needless to say, the Bren 2 will accept a large number of the differing types of 5.56 magazines as long as they are STANAG-compatible. The oil bottle in the cleaning kit has a cap which is cracked but the bottle does not leak. Overall, the Bren 2 MS is a fine AR-style pistol and one suited for a variety of tasks, with the reliability to back it up in the worst of conditions. Price: $1,824.90 Handgun Caliber: .223 Remington, 5.56x45mm NATO Manufacturer: CZ USA Model: Bren 2 MS Serial Number: F437394 Barrel Length: 8.26 inches (210 mm) Bore Info: Rifled, 6 grooves, 1:7 inches (1 in 178 mm) RH twist Ejectors: Auto-ejection Condition: New in Box Barrels: Cold Hammer Forged Barrel Type: Standard Action: Semi-Auto, Short-stroke gas piston, rotating bolt Triggers: Two-stage trigger, 4.5 lbs. pull weight Stock: SB BREN2-01-SB brace (NOT a stock) Fore End: Alloy handguard with M-Lok slots and little bolt-on rail-less rail sections. Finish: Matte black Weight: 5.4 lbs. with empty magazine, 6 lbs. 5.2 oz. w/brace and empty magazine. Sights: Flip-up front and rear sights, sight radius 12.2 inches (310 mm). Extras: See description Case: CZ box Contact Seller |
Click Photo to Enlarge
Guns International #: 102830763
Seller's Inventory #: 24090014
Category - CZ
Pistols
- Tactical Pistols
CZ USA Bren 2 MS Pistol 5.56 NATO 8” New in Box w/SB Brace
Description:
The CZ Bren 2 MS is a development of the original 805 Bren. While the 805 was built to a specific set of requirements created by the Czech military, the Bren 2 represents a total overhaul. The focus of the design changes was to reduce the size and weight of both the pistol and rifle versions while improving the modularity. The aluminum receiver has been trimmed down in size while the lower is made from a carbon fiber-reinforced polymer. The pistol version is available in both 5.56 NATO and the 7.62x39 cartridge, with multiple barrel lengths available for each chambering. All variants of the Bren 2 are swappable to different barrel lengths and chamberings. The 5.56 model with 8-inch (actually 8.26”) barrel has the SKU number of 91450. The barrel is cold hammer forged. The rifling consists of conventional lands and grooves, with 6 grooves and a 1:7-inch right-hand twist. This should be more than sufficient to stabilize the heaviest bullets available for the 5.56 NATO and .223 Remington. Equipped with a Spiral three-arm flash hider from the factory, the muzzle is threaded with the common 1/2-28 pitch found on most 5.56 and 9mm firearms, making the installation of other muzzle devices very easy. The aluminum fore end features M-LOK slots and little bolt-on rail-less rail sections. The easy attachment of M-Lok rails allows for the mounting of a variety of accessories such as a flashlight and laser. Like the barrel, the modular fore end can be swapped to different lengths as well. Blending naturally with the fore end, the aluminum upper features a MIL-STD 1913 picatinny rail for mounting a variety of sights. The pistol comes with conventional flip-up sights. Whereas the previous 805 Bren had a reciprocating charging handle, the Bren 2 features a more ergonomical non-reciprocating handle. It can be swapped from left to right to suit the user’s needs. The lower receiver features an AR-style bolt-catch/release that is mirrored on both sides of the firearm, as well as a third catch/release lever located in the inner face of the trigger guard. The magazine release and safety are also ambidextrous. What separates the Bren 2 from most AR15 pistols is the use of a high-quality gas piston system. This allows the Bren 2 to operate much more efficiently and cleaner. The gas block features a switch with three positions, marked 1, 2, and 0. Position 1 is for normal use, 2 is for adverse conditions (i.e. more gas), and 0 is for “off”. The second setting is best for use with lower quality ammo or suppressors. The two-stage trigger will have a pull weight of around 4.5 lbs. The integral polymer pistol grip features a removable backstrap and a storage space. Weight of the Bren 2 MS is a light 5.4 lbs. without the brace. Although it does not come standard, this Bren 2 MS comes brand new with an SB BREN2-01-SB folding brace. The brace is factored into the price. There is a full cleaning kit and one factory-issue 30-round polymer magazine. Needless to say, the Bren 2 will accept a large number of the differing types of 5.56 magazines as long as they are STANAG-compatible. The oil bottle in the cleaning kit has a cap which is cracked but the bottle does not leak. Overall, the Bren 2 MS is a fine AR-style pistol and one suited for a variety of tasks, with the reliability to back it up in the worst of conditions.
Price: $1,824.90
Handgun Caliber: .223 Remington, 5.56x45mm NATO
Manufacturer: CZ USA
Model: Bren 2 MS
Serial Number: F437394
Barrel Length: 8.26 inches (210 mm)
Bore Info: Rifled, 6 grooves, 1:7 inches (1 in 178 mm) RH twist
Ejectors: Auto-ejection
Condition: New in Box
Barrels: Cold Hammer Forged
Barrel Type: Standard
Action: Semi-Auto, Short-stroke gas piston, rotating bolt
Triggers: Two-stage trigger, 4.5 lbs. pull weight
Stock: SB BREN2-01-SB brace (NOT a stock)
Fore End: Alloy handguard with M-Lok slots and little bolt-on rail-less rail sections.
Finish: Matte black
Weight: 5.4 lbs. with empty magazine, 6 lbs. 5.2 oz. w/brace and empty magazine.
Sights: Flip-up front and rear sights, sight radius 12.2 inches (310 mm).
Extras: See description
Case: CZ box
Description:
The CZ Bren 2 MS is a development of the original 805 Bren. While the 805 was built to a specific set of requirements created by the Czech military, the Bren 2 represents a total overhaul. The focus of the design changes was to reduce the size and weight of both the pistol and rifle versions while improving the modularity. The aluminum receiver has been trimmed down in size while the lower is made from a carbon fiber-reinforced polymer. The pistol version is available in both 5.56 NATO and the 7.62x39 cartridge, with multiple barrel lengths available for each chambering. All variants of the Bren 2 are swappable to different barrel lengths and chamberings. The 5.56 model with 8-inch (actually 8.26”) barrel has the SKU number of 91450. The barrel is cold hammer forged. The rifling consists of conventional lands and grooves, with 6 grooves and a 1:7-inch right-hand twist. This should be more than sufficient to stabilize the heaviest bullets available for the 5.56 NATO and .223 Remington. Equipped with a Spiral three-arm flash hider from the factory, the muzzle is threaded with the common 1/2-28 pitch found on most 5.56 and 9mm firearms, making the installation of other muzzle devices very easy. The aluminum fore end features M-LOK slots and little bolt-on rail-less rail sections. The easy attachment of M-Lok rails allows for the mounting of a variety of accessories such as a flashlight and laser. Like the barrel, the modular fore end can be swapped to different lengths as well. Blending naturally with the fore end, the aluminum upper features a MIL-STD 1913 picatinny rail for mounting a variety of sights. The pistol comes with conventional flip-up sights. Whereas the previous 805 Bren had a reciprocating charging handle, the Bren 2 features a more ergonomical non-reciprocating handle. It can be swapped from left to right to suit the user’s needs. The lower receiver features an AR-style bolt-catch/release that is mirrored on both sides of the firearm, as well as a third catch/release lever located in the inner face of the trigger guard. The magazine release and safety are also ambidextrous. What separates the Bren 2 from most AR15 pistols is the use of a high-quality gas piston system. This allows the Bren 2 to operate much more efficiently and cleaner. The gas block features a switch with three positions, marked 1, 2, and 0. Position 1 is for normal use, 2 is for adverse conditions (i.e. more gas), and 0 is for “off”. The second setting is best for use with lower quality ammo or suppressors. The two-stage trigger will have a pull weight of around 4.5 lbs. The integral polymer pistol grip features a removable backstrap and a storage space. Weight of the Bren 2 MS is a light 5.4 lbs. without the brace. Although it does not come standard, this Bren 2 MS comes brand new with an SB BREN2-01-SB folding brace. The brace is factored into the price. There is a full cleaning kit and one factory-issue 30-round polymer magazine. Needless to say, the Bren 2 will accept a large number of the differing types of 5.56 magazines as long as they are STANAG-compatible. The oil bottle in the cleaning kit has a cap which is cracked but the bottle does not leak. Overall, the Bren 2 MS is a fine AR-style pistol and one suited for a variety of tasks, with the reliability to back it up in the worst of conditions.
Price: $1,824.90
Handgun Caliber: .223 Remington, 5.56x45mm NATO
Manufacturer: CZ USA
Model: Bren 2 MS
Serial Number: F437394
Barrel Length: 8.26 inches (210 mm)
Bore Info: Rifled, 6 grooves, 1:7 inches (1 in 178 mm) RH twist
Ejectors: Auto-ejection
Condition: New in Box
Barrels: Cold Hammer Forged
Barrel Type: Standard
Action: Semi-Auto, Short-stroke gas piston, rotating bolt
Triggers: Two-stage trigger, 4.5 lbs. pull weight
Stock: SB BREN2-01-SB brace (NOT a stock)
Fore End: Alloy handguard with M-Lok slots and little bolt-on rail-less rail sections.
Finish: Matte black
Weight: 5.4 lbs. with empty magazine, 6 lbs. 5.2 oz. w/brace and empty magazine.
Sights: Flip-up front and rear sights, sight radius 12.2 inches (310 mm).
Extras: See description
Case: CZ box
Guns International #: 102830763
Seller's Inventory #: 24090014
Guns International #: 102830763
Seller's Inventory #: 24090014
Category - CZ
Pistols
- Tactical Pistols
CZ USA Bren 2 MS Pistol 5.56 NATO 8” New in Box w/SB Brace
Description:
The CZ Bren 2 MS is a development of the original 805 Bren. While the 805 was built to a specific set of requirements created by the Czech military, the Bren 2 represents a total overhaul. The focus of the design changes was to reduce the size and weight of both the pistol and rifle versions while improving the modularity. The aluminum receiver has been trimmed down in size while the lower is made from a carbon fiber-reinforced polymer. The pistol version is available in both 5.56 NATO and the 7.62x39 cartridge, with multiple barrel lengths available for each chambering. All variants of the Bren 2 are swappable to different barrel lengths and chamberings. The 5.56 model with 8-inch (actually 8.26”) barrel has the SKU number of 91450. The barrel is cold hammer forged. The rifling consists of conventional lands and grooves, with 6 grooves and a 1:7-inch right-hand twist. This should be more than sufficient to stabilize the heaviest bullets available for the 5.56 NATO and .223 Remington. Equipped with a Spiral three-arm flash hider from the factory, the muzzle is threaded with the common 1/2-28 pitch found on most 5.56 and 9mm firearms, making the installation of other muzzle devices very easy. The aluminum fore end features M-LOK slots and little bolt-on rail-less rail sections. The easy attachment of M-Lok rails allows for the mounting of a variety of accessories such as a flashlight and laser. Like the barrel, the modular fore end can be swapped to different lengths as well. Blending naturally with the fore end, the aluminum upper features a MIL-STD 1913 picatinny rail for mounting a variety of sights. The pistol comes with conventional flip-up sights. Whereas the previous 805 Bren had a reciprocating charging handle, the Bren 2 features a more ergonomical non-reciprocating handle. It can be swapped from left to right to suit the user’s needs. The lower receiver features an AR-style bolt-catch/release that is mirrored on both sides of the firearm, as well as a third catch/release lever located in the inner face of the trigger guard. The magazine release and safety are also ambidextrous. What separates the Bren 2 from most AR15 pistols is the use of a high-quality gas piston system. This allows the Bren 2 to operate much more efficiently and cleaner. The gas block features a switch with three positions, marked 1, 2, and 0. Position 1 is for normal use, 2 is for adverse conditions (i.e. more gas), and 0 is for “off”. The second setting is best for use with lower quality ammo or suppressors. The two-stage trigger will have a pull weight of around 4.5 lbs. The integral polymer pistol grip features a removable backstrap and a storage space. Weight of the Bren 2 MS is a light 5.4 lbs. without the brace. Although it does not come standard, this Bren 2 MS comes brand new with an SB BREN2-01-SB folding brace. The brace is factored into the price. There is a full cleaning kit and one factory-issue 30-round polymer magazine. Needless to say, the Bren 2 will accept a large number of the differing types of 5.56 magazines as long as they are STANAG-compatible. The oil bottle in the cleaning kit has a cap which is cracked but the bottle does not leak. Overall, the Bren 2 MS is a fine AR-style pistol and one suited for a variety of tasks, with the reliability to back it up in the worst of conditions.
Price: $1,824.90
Handgun Caliber: .223 Remington, 5.56x45mm NATO
Manufacturer: CZ USA
Model: Bren 2 MS
Serial Number: F437394
Barrel Length: 8.26 inches (210 mm)
Bore Info: Rifled, 6 grooves, 1:7 inches (1 in 178 mm) RH twist
Ejectors: Auto-ejection
Condition: New in Box
Barrels: Cold Hammer Forged
Barrel Type: Standard
Action: Semi-Auto, Short-stroke gas piston, rotating bolt
Triggers: Two-stage trigger, 4.5 lbs. pull weight
Stock: SB BREN2-01-SB brace (NOT a stock)
Fore End: Alloy handguard with M-Lok slots and little bolt-on rail-less rail sections.
Finish: Matte black
Weight: 5.4 lbs. with empty magazine, 6 lbs. 5.2 oz. w/brace and empty magazine.
Sights: Flip-up front and rear sights, sight radius 12.2 inches (310 mm).
Extras: See description
Case: CZ box
Description:
The CZ Bren 2 MS is a development of the original 805 Bren. While the 805 was built to a specific set of requirements created by the Czech military, the Bren 2 represents a total overhaul. The focus of the design changes was to reduce the size and weight of both the pistol and rifle versions while improving the modularity. The aluminum receiver has been trimmed down in size while the lower is made from a carbon fiber-reinforced polymer. The pistol version is available in both 5.56 NATO and the 7.62x39 cartridge, with multiple barrel lengths available for each chambering. All variants of the Bren 2 are swappable to different barrel lengths and chamberings. The 5.56 model with 8-inch (actually 8.26”) barrel has the SKU number of 91450. The barrel is cold hammer forged. The rifling consists of conventional lands and grooves, with 6 grooves and a 1:7-inch right-hand twist. This should be more than sufficient to stabilize the heaviest bullets available for the 5.56 NATO and .223 Remington. Equipped with a Spiral three-arm flash hider from the factory, the muzzle is threaded with the common 1/2-28 pitch found on most 5.56 and 9mm firearms, making the installation of other muzzle devices very easy. The aluminum fore end features M-LOK slots and little bolt-on rail-less rail sections. The easy attachment of M-Lok rails allows for the mounting of a variety of accessories such as a flashlight and laser. Like the barrel, the modular fore end can be swapped to different lengths as well. Blending naturally with the fore end, the aluminum upper features a MIL-STD 1913 picatinny rail for mounting a variety of sights. The pistol comes with conventional flip-up sights. Whereas the previous 805 Bren had a reciprocating charging handle, the Bren 2 features a more ergonomical non-reciprocating handle. It can be swapped from left to right to suit the user’s needs. The lower receiver features an AR-style bolt-catch/release that is mirrored on both sides of the firearm, as well as a third catch/release lever located in the inner face of the trigger guard. The magazine release and safety are also ambidextrous. What separates the Bren 2 from most AR15 pistols is the use of a high-quality gas piston system. This allows the Bren 2 to operate much more efficiently and cleaner. The gas block features a switch with three positions, marked 1, 2, and 0. Position 1 is for normal use, 2 is for adverse conditions (i.e. more gas), and 0 is for “off”. The second setting is best for use with lower quality ammo or suppressors. The two-stage trigger will have a pull weight of around 4.5 lbs. The integral polymer pistol grip features a removable backstrap and a storage space. Weight of the Bren 2 MS is a light 5.4 lbs. without the brace. Although it does not come standard, this Bren 2 MS comes brand new with an SB BREN2-01-SB folding brace. The brace is factored into the price. There is a full cleaning kit and one factory-issue 30-round polymer magazine. Needless to say, the Bren 2 will accept a large number of the differing types of 5.56 magazines as long as they are STANAG-compatible. The oil bottle in the cleaning kit has a cap which is cracked but the bottle does not leak. Overall, the Bren 2 MS is a fine AR-style pistol and one suited for a variety of tasks, with the reliability to back it up in the worst of conditions.
Price: $1,824.90
Handgun Caliber: .223 Remington, 5.56x45mm NATO
Manufacturer: CZ USA
Model: Bren 2 MS
Serial Number: F437394
Barrel Length: 8.26 inches (210 mm)
Bore Info: Rifled, 6 grooves, 1:7 inches (1 in 178 mm) RH twist
Ejectors: Auto-ejection
Condition: New in Box
Barrels: Cold Hammer Forged
Barrel Type: Standard
Action: Semi-Auto, Short-stroke gas piston, rotating bolt
Triggers: Two-stage trigger, 4.5 lbs. pull weight
Stock: SB BREN2-01-SB brace (NOT a stock)
Fore End: Alloy handguard with M-Lok slots and little bolt-on rail-less rail sections.
Finish: Matte black
Weight: 5.4 lbs. with empty magazine, 6 lbs. 5.2 oz. w/brace and empty magazine.
Sights: Flip-up front and rear sights, sight radius 12.2 inches (310 mm).
Extras: See description
Case: CZ box
Contact Seller
Buy Now
Guns International Advertising Policy
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classifed advertising of guns, gun related items and services for sale online. If you are looking to buy guns or sell guns, you have come to the right place. GunsInternational.com gun classifieds currently have over 100,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
GunsInternational.com is the #1 Gun Classified website that brings gun buyers and gun brokers or sellers together through classifed advertising of guns, gun related items and services for sale online. If you are looking to buy guns or sell guns, you have come to the right place. GunsInternational.com gun classifieds currently have over 100,000 guns for sale online by numerous dealers and collectors alike. Guns International makes no representation or warranty as to the accuracy of the information contained in the gun classifieds, gun parts or gun services classifieds listings. Buyers and sellers are required to know and comply with all applicable local, state, federal and international firearm laws.
Listings
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
Home
New Today
New This Week
Rifles For Sale Online
Shotguns For Sale Online
Handguns For Sale Online
Pistols For Sale Online
Revolvers For Sale Online
NFA
Gun Parts For Sale Online
Services
©2006 - 2024 all rights reserved. | Guns International.com | V4.1 ww3
Privacy Policy
User Agreement
FAQs
Contact Us
©2006 - 2024 all rights reserved.
Guns International.com | V4.1 ww3
Guns International.com | V4.1 ww3