The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
Springfield Buffington rear sight base with windage screw screw moves freely threads look intact.
Price includes shipping and all Credit Card Fees.
...Click for more info
THIS IS AN ORIGINAL EARLY H&R RIESING, M-60 20 RD. , .45 CAL. MAG. IN VERY GOOD CONDITION. SOME SUP'L FROST, MOST OF THE ORIGNAL BRIGHT FINSH REMAINS WITH PERFECT LIPS , BOTTOM PLATE AND NO DENTS.
...Click for more info
Remington 03-A3 Sporterized with Original Metal ,30-06 ,Excellent Bore ,Four Groove Barrel Dated 4-43 ,Parkerized Finish ,All Metal is Present Except Front Band and Bayonet Lug ,Stock is Modified but
...Click for more info
This is a WWII The National Postal Meter Type II M1 Carbine Trigger Housing with no other components. The housing is in very good+ condition with very little wear on the edges. It is clearly marked on
...Click for more info
Resin replica M60 machine gun with bipod, has no moving parts
item Code: RR010_
Description: Replica M60
Item Size: 43 x 11 x 14 inches
Packaging Size: 45.75 x 11 x 6.25 inches
Net We
...Click for more info
Resin replica of m16a1, all resin fiberglass new in box
item Code: RR004_
Description: Replica M16A1
Item Size: 38.5 x 10 x 2.75 inches
Packaging Size: 41 x 12.75 x 5 inches
Net Weight: 3
...Click for more info
Item Code: RR023_
Description: Replica XM25
Item Size: 29.5 x 4.25 x 13 inches
Packaging Size: 31.75 x 15.5 x 7.5 inches
Net Weight: 3.68 kgs.
Gross Weight: 5.40 kgs.
CBM: 0.0605
Resi
...Click for more info
M-1 Garand barrel. SA-8-44.
Very good condition.
Bright mirror bore with no pitting or frosting.
ME=just under 1.
TE=5.
Dark blackish grey Parkerizing with typical wear marking of being on a rif
...Click for more info
This is an original Colt 1911 Smooth Mainspring Housing Lanyard Loop produced between 1911-1923. There is very little original finish but still in very good condition. please see photo's for finer det
...Click for more info
Springfield Trap door Bayonet and Scabbard ,Found in estate sale , very good condition. See photos for condition. Shipping $29.00.
...Click for more info
M-1 Garand SA-6-curved, un- cut, op rod. Original US, not new or aftermarket. Rod has smooth, darker grey-black, Parkerizing. No rust or pitting. Tip is good. Rod was never modified with the relief cu
...Click for more info
Garand M-1 Winchester op rod. This rod is original not an aftermarket. It is NOS or refinished. Parkerizing is a darkish black but looks lighter under bright light. Under bright light you can see some
...Click for more info
This is an orientation Colt 1911 Type 3, Long Hammer with Round Edges, Hammer Assembly which comes with the hammer strut and pin. Approximate manufactures date is Mid-1918 to 1938. This unit has very
...Click for more info
item Code: RR015.1_
Description: Replica MA-2(extra-strong)
Item Size: 65 x 7.5 x 6.5 inches
Packaging Size: 39 x 9.25 x 11inches
Net Weight: 7.08 kgs.
Gross Weight: 9.08 kgs.
CBM: 0.065
...Click for more info
U.S. Model 1917-A1 Tripod & Cradle
U.S. Model 1917-A1 Tripod & Cradle, tripod was designed to accommodate the extremely heavy, water-cooled .30 caliber M1917-A1 machine gun, manufacturers
...Click for more info
M-1 Garand SA-9-curved, un- cut, op rod. Rod has darker, almost black, Parkerizing. No rust or pitting. Light wear. Excellent tip. Rod was never modified with the relief cut. Rod appears much darker i
...Click for more info
Here is a very nice uncut Winchester operating rod for the M1 Garand. This rod has been refinished. Piston measures .525+. Tab is in like new condition as well as the pointed area in
...Click for more info
This is an original set of walnut stocks for the Colt 1911. Manufactured by Springfield for Colt with 11 row of checkering between the diamonds. The checkering is near excellent with just a few wear a
...Click for more info
Another great item from Gainesville Pawn! Up for sale is a USMC Sedgley 1903 barrel. These were installed by the Marines to 1903 rifles during their rebuilding of 1903 rifles leading up to WW 2. They
...Click for more info
Surplus FACTORY FN FNH M16A2 TACTICAL A2 UPPER USED 5.56 20” Retro GWOT AR
Photo is representative pulled at random / BCG markings vary.
USED.
VG Surplus Condition.
Bright
...Click for more info
This is a blackened steel tool with a right angle "U" shaped cut which serves as a mainspring clamp, a pin punch on the lower arm and a pair of flat screw driver blades to the end of each ar
...Click for more info
**SOLD** Original WW2 M1A1 Paratrooper stock parts. This stock includes everything in the pictures. Stock is complete with all hardware and a 2 rivot hand guard, minus the wire stock extesion assembly
...Click for more info
Clean and straight Sssprongfield 1903-A3 receiver With WWII serial number of 37634XX with clean and sharp barrel threads evident., finish is excellent and the left side safety area has some finish dis
...Click for more info
Here we have a few parts for US M1 carbine. Slide handle new. Stripped trigger assembly new. Recoil block and bolt new. Rear Sight appears to be vintage. Misc springs??? and flash hider appears to be
...Click for more info
Listed for sale is this 1903 Springfield walnut stock to include full length stright pistol grip lower stock with upper handguard ,fore end metal with stacking swivel and bayonet lug and rear sling sw
...Click for more info
A NOS parkerized Garand WWII era reciever with clear markings and solid with no dfamage evident. SN appears to be Springfiled Armory October 1943. Some slight storage surface discoloration but not rus
...Click for more info
NOS reciecver parkerized and complete no damage evident. Clear strong markings .Has the rear sight also.This ships to a FFL 01 license.
When buying a gun always have it examined by a competent gunsmi
...Click for more info
This is a M1 Carbine Muzzle Brake/Check Recoil marked F in an oblong circle, standing for the manufacture Ferro Machine. It would appear that they produced these for contracts for other governments, s
...Click for more info
This is an excellent condition M1918 Browning Automatic Rifle A2 Carrying Handle with fine, mark free wood handle with one small chip, mark free end cap, steel arm retains almost all original finish w
...Click for more info
M-1 Carbine butt plate and 15 round magazines (5). 2 Mags are in wrappers. One marked "U", one "MN". 3 used marked
UN, SW, (SP)
$95 for the lot.
...Click for more info
4 unissued still in the box, Remington Bolt Assembly M/1903-A3, drawing No. B 146891. The box is in excellent condition with two heavy paper packs, containing 2 bolt assemblies. The assemblies are new
...Click for more info
This tool is marked M.P. Corp. with rough textured handle and polished extractor.
This is finished with dark grey parkerizing.
This tool was first listed in U.S. Army Technical Regulation 1300-30G d
...Click for more info
PRICED REDUCED - This is a genuine 1943 M1 Garand Springfield barrel that has been converted to an 18 inch M1 Garand Tanker barrel. Included is a period correct gas cylinder with the correct sight, cy
...Click for more info
Original Springfield manufactured front barrel bands.
Very good - excellent condition. You receive may not be the exact one pictured.;
...Click for more info
These spring tubes are in unused condition. They still have the original finish intact. These are for the early production M1 Carbines that have the detachable spring tubes. Search for hlvfineguns on
...Click for more info
Krag Carbine sling swivel and bar for 1896 or 1898 Krag carbine. In nice condition with about 90% original finish. Some wear on rear edge of flat bar. Some surface flat areas from contact towards the
...Click for more info
This is a later WWII type II M1 Carbine slide manufactured by Saginaw, Grand Rapids.
It has the narrow arm joint and is marked with "S'G'" on the inside of the slide well.
The part is in v
...Click for more info
This is an M1 Garand Complete Bolt for your Springfield M1 circa SN 3,500,000 to end of WWII.
Parkerized finish in very good condition. Lot numbers - "D28287-19SA/B-16-B". You will receive
...Click for more info
This is a WWII USGI M1 Carbine slide, type II with the narrow arm joint.
The part is marked "J" which may indicate either a wartime production by Saginaw or a post-war rework.
The slide sh
...Click for more info
A trigger, guard, plate sling ring and screw set including the barrel tang screw for an 1866 Allin conversion rifle.
Exposed metal shows a dark brown patina with scattered darker stains.
This is all
...Click for more info
This is a lot of 10 - type IV safeties feature various manufacturers marks including "N", "S" in a circle, "JAO" and "CM". All look used. Condition is good.
...Click for more info
This is a USGI Springfield trigger housing marked "D28296-12-SA" for the M1 Garand that includes a hammer marked "C46008-2 SA" along with trigger and retaining pins.
The parkerize
...Click for more info
This is a Type III USGI trigger housing manufactured by Winchester for the M1 Carbine.
This part is marked "W" and has the additional number and symbols on the side and bottom indicating Wi
...Click for more info
This is a Type III USGI trigger housing manufactured by Inland for the M1 Carbine.
This part has the vertical Inland stamp and the raised ribs
in the magazine well.
The magazine wall has been groun
...Click for more info