The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
The serial numbers match on the blade and bayonet.
This blade has the Argentine crest intact. Most of the Argentine bayonets had the crest ground off before they left the country.
See photos f
...Click for more info
Rare M1867 Peabody bayonet
Socket bayonet for use with the Model 1867 Peabody cartridge rifle This uncommon bayonet is identified by it’s dimensions and rather long Picasso compared to
...Click for more info
Turkish M1890 Mauser Bayonet. Maker marked A.S.F.A.
Bayonet is in good condition included with a nice tight fitting scabbard.
This model is very rare . It has the leaf spring opera
...Click for more info
This is an original first issue bayonet for the AK-47. This model is the polish version.
Produced 1955-1960
The bayonet is in excellent condition both the bayonet and the scabbath
Leather belt loop
...Click for more info
SSE THE PICTURES OF RUSSIAN M1891/30 MOSIN NAGANT RIFLE BAYONET SERIAL NUMBER TH2636 WITH A CRUCEFORM 17 INCHES BLADE IN EXCELLENT ORIGINAL CONDITION WITH TRUE SCREWDRIVER POINT. YHIS BAYONET HAS
...Click for more info
SEE THE PICTURES OF THIS RARE & BEAUTIFUL COLT AR15-AR16 M7 MARKED BAYONET WITH SCABBARD IN AS NEW ORIGINAL CONDITION. IT IS HIGHLY COLLECTIBLE UNISSUED COLLECTOR DREAM MADE IN W. GERMANY UN
...Click for more info
This is a Turkish Peabody-Martini Rifle Saber Bayonet. Bayonet measures 28 1/4" overall with a blade of 22 1/2". The bright blade is in Very Good condition with light speckling and nice edge
...Click for more info
This is a WWI German 1898/05 rifle Bayonet & scabbard. This is a nice example of aWAFFENFABRIK/ MAUSER/ OBERNDORF a.N., new pattern 98/05 with a trimmed muzzle ring and with flash guard. The unsha
...Click for more info
This is an original Swedish Mauser M1896 Bayonet with the scabbard and frog manufactured by Carl Gustaf Stad sometime after 1913. The 8 1/4" blade is in very good condition, stamped Crown over 40
...Click for more info
This is a Krag bayonet stamped US on the obverse of the ricasso and dated 1899 on the reverse. It measures 16 1/8 inches overall with an 11 1/8 inch fullered blade that has been lightly sharpened with
...Click for more info
This is a high quality pre-WWII built M1897 Type 30/38/99 Arisaka Rifle Bayonet. This particular M1897 was built by Kokura and has a bright sharpened, 15 9/16" blade with light spotting and prese
...Click for more info
This "4-45" dated bayonet was built at Orange.
Grips are marked "Slaz 44".
Bayonet remains in very good condition retaining over 90% finish with a few marks on grip scales.
Come
...Click for more info
Serial #65628. This 1883 dated bayonet measures 25 3/8 overall, with a 20 1/2 straight, T-shaped blade. The steel has an overall pewter silver patina with some light oxidation near the ricasso. The bl
...Click for more info
This is a British Pattern 1888 Bayonet. The sharpened 11 7/8" blade is in good condition with broad arrow WD, X bend test, 98, 96, 03, 130 and Wilkinson London, on the ricasso. Well patina wooden
...Click for more info
This is a second type bayonet scabbard, model of 1905 built between 1907 and 1911 for the U.S. 1905 type bayonet. The leather covered wood scabbard has the brass eyelet drain hole at the rear tip with
...Click for more info
Finn M29 Bayonet with sheath. Bayonet manufactured by Fiskars. All in excellent condition. Excellent bluing on everything. Fantastic blade condition. Retains factory edge. Black locking button.
We
...Click for more info
This is a World War I model M1898/05 "Butcher Blade" sword bayonet maker marked on the reverse "Pack Oligher & Co. / Solingen" with "crown over W/17" and proof on the
...Click for more info
This fitted the Mauser Gewehr 98 b which was one of the standard German infantry rifle. S185 is the manufacturers code for Elite Diamante. Early 1936 model marked S/185 on one side and 7779 over i on
...Click for more info
Serial #91774. This 1877 dated bayonet measures 25 3/8 overall, with a 20 1/2 straight, T-shaped blade. The steel has an overall pewter gray patina with some dark freckling near the tip, and a single
...Click for more info
This is a U.S. M5A1 MILPAR COL Bayonet & USM8A1 Scabbard V.P.CO. The bayonet is in good to very good used condition. The blade shows signs of used with one side showing signs of impacts, with the
...Click for more info
This is a British P-1842 Socket Bayonet for use with Lovell Catch on the 1842 musket and 1851 Minie rifle. This bayonet is in very good original condition with bright finish 17" blade with many s
...Click for more info
This is a great example of an M1924 export pattern bayonet. The unsharpened 298mm blade is in excellent condition with no nicks and light age soiling. The cross guard has #299 stamped in it. The handl
...Click for more info
This is a US marked Ross Rifle MkI Bayonet patent marked 1907 and dated 11-09 in the original leather scabbard. Having both US and Canadian markings this was part of a small purchase of Ross Rifles in
...Click for more info
Danish GM50 M1 Garand Bayonet. See photos for condition and call Bill at RW Outdoors with any questions at 406-842-5271. Shipping included in price.
...Click for more info
This is a British M1853 Socket Bayonet for use with the Enfield, Snider, Martini rifles. This bayonet is in very good+ original condition with a dark finish 17.5" blade with many signs of use, li
...Click for more info
This is a rare Belgium Model 1868 Saw-Back, measures 23.5" overall with a blade length of 18 5/8", inside socket diameter of socket is .675" and has a screw on top of the socket to adju
...Click for more info
This is a M188/98 bayonet and matching numbered scabbard and leather frog for the 98K rifle manufactured by Carl Eickhorn. In excellent condition this bayonet features brown bakelite grips, matching s
...Click for more info
Designed to fit a 45/70 Trapdoor Springfield Rifle, these are very rarely seen in any condition, much less good used condition such as this. These will fit any M-1873 Springfield trapdoor ri
...Click for more info
Rock Island M1905 Bayonet stamped RIA 1918 with scabbard. See photos for condition and call RW Outdoors with any questions at 406-842-5271. Shipping included in price.
...Click for more info
18 inch blade is in excellent condition with about 90% original blue. Fine little item.
Leroy Merz Antique Firearms specializes in antique and vintage Winchesters and other fine American firearms.
...Click for more info
FN FAL Type C Spike Bayonet. See photos for condition and call Bill at RW Outdoors with any questions. Shipping included in price.
...Click for more info
This is a post WWI produced M1905 bayonet manufactured by Springfield Armory dated 1921 configured for WWII use with a "BN" marked (Beckwith Manufacturing) M3 scabbard and WWII era black bak
...Click for more info
This is an excellent pre-WWI M1905 bayonet manufactured by Rock Island Arsenal dated 1912 housed in a RIA marked second type leather scabbard dated 1910. In near excellent condition the 20 1/2" O
...Click for more info
This is a WWII produced M1905 bayonet manufactured by The Union Fork and Hole company in Columbus, Ohio dated 1942. In excellent condition the 20 1/2" OAL bayonet has a 15 3/4 inch unsharpened bl
...Click for more info
"Romanian Md63 AKM knife bayonet with scabbard & leather frog. Overall length is 11-inches & the blade length is 5.75-inches. This is an Eastern Bloc military surplus bayonet & the we
...Click for more info
"Pioneer's sawback sword bayonet for use on the 7.5mm Schmidt-Rubin M1911 carbine & M1931 Short Rifle (K31). Designated ""Sägebajonett Mod. 1914"" (""Sawing Bayo
...Click for more info
"U.S. M1905 16-inch bayonet that was made by Springfield Armory in 1906. Comes with unit marked wood grips & a canvas covered wood scabbard. Overall excellent/minty condition.
...Click for more info
"Type 1 knife bayonet for the pre-ban Chinese Polytech Legend AK-47/Type 56 rifle. Comes with a metallic scabbard with belt-hanger. The blade is 7.87-inches long & its overall length is 12-in
...Click for more info
"Dolchbajonett Mod. 1889 (""Dagger Bayonet Model 1889"") for use on the 7.5mm Schmidt-Rubin M1889 & M1911 rifles. This item was produced by Waffenfabrik Neuhausen & ha
...Click for more info
"British Pattern 1888 Mk.1 Type 2 Lee-Metford rifle bayonet in used but good condition. The blade is 12-inches long & the overall length is 16.75 inches.
...Click for more info
"This is a commercial M4 bayonet for the M1 Carbine that was made by American Korean Industries (""AKI""). The blade is 6.75-inches long & the overall length is 11.75-inch
...Click for more info
"Cutdown Mk.1** bayonet for the Short Magazine Lee Enfield (SMLE) rifle made by the Rifle Factory Ishapore (R.F.I.) in India. The blade length is 11.75-inches & the overall length is 16.25-in
...Click for more info
"Yugoslavian M48 Mauser rifle bayonet & metal scabbard that was made by Factory 44 (Zavodi Crvena Zastava - or ""Red Flag Works"") in Kragujevac, Serbia. Marked "
...Click for more info
This is an excellent condition WW2 Australian Pattern 1907 No. I Mk. III Rifle Bayonet with Scabbard.
This bayonet was refurbished in 1946 after the war.
The near 17" blade retains almost all t
...Click for more info
"Yugoslavian M48 Mauser bayonet & scabbard in very good condition. The bayonet has a 9.75-inch blade length & a 16-inch overall length. The number ""46934"" is marked
...Click for more info
32610- WW2 WWII GERMAN FIRE BRIGADE DRESS DAGGER AND SCABBARD. 16” o/a with 10” blade. Nickel plated with black painted steel scabbard. Near unissued condition. Extra nice. $125.
...Click for more info
Mauser Bayonet 16 ½" total length.
Maybe German or Belgium. ? Only maker mark on it is an M or maybe W in a circle.
I purchased it as a German Bayonet.
It came w
...Click for more info
Japanese Army WWII Type 30 Straight Guard Arisaka Bayonet
Blade length 15"
Overall length is 20"
Made for 38 & 99 Rifles
First designed in 1897 and used through World W
...Click for more info