The server has not detected any activity for the last 3 hours.
For your security, your session will expire in 2 minutes and you will be redirected to the Sign In page.
Would you like to stay signed in?
Measuring approximately 24×16x16 inches. Lock is marked ‘Adams Express Co.” Overall box shows plenty of usage with a new green paint job having been applied at some time but still in
...Click for more info
This trap gun stands about 15 inches high and is powered by a 12 gauge shotgun shell. That will take care of a gopher! This also appears to be a patent applicant trap. Not an elaborate contraption and
...Click for more info
One arrowhead shaped piece has a crater and small hole reaching to the opposite side. No doubt used to start fires with a twirling wood shaft-very rare. 29 pieces in all. Mounted in an 8 by 12 inch di
...Click for more info
21 assorted 1-1/4 to 2 inch long arrowheads as well as 4 drill type points that are 2 to 2-1/2 inches long. Good condition. Attractive display.
Leroy Merz Antique Firearms specializes in antique
...Click for more info
Six are probably spear points 2-3/4 inches long. The balance are arrowheads 1-1/4 inches to 2-1/4 inches long. Good condition. Set in a 12 inch X 16 inch display case.
Leroy Merz Antique Fir
...Click for more info
This prop is all made of rubber and very detailed. Typical Winchester buckhorn sight. The loop lever is torn and the hammer is missing. Old leather scabbard. Guess they just needed something that look
...Click for more info
“Otto Eber – Maker – Sealy, Tex.” Marked Cartridge Belt; 40” L.O.A. and 2 ¾” Wide; 30 Large Caliber Cartridge Loops (.45/.44-40/Etc.); Great Overall
...Click for more info
Really Nice Huge Cartridge/Money Belt Marked “N. Porter – Phoenix, Ariz.”; 46” L.O.A. and 3” Wide; 34 Large Caliber Cartridge Loops (.45/.44-40/Etc.); Very Possib
...Click for more info
Typical Style Pair of Robert L. Causey Spurs; Marked “R.L.C.”; Robert Lincoln Causey was Born on Feb. 12, 1868 in Kansas City, Mo.; Died 1937 in Safford, Az.; He Made Spurs in Odessa, Texa
...Click for more info
Very Well Made Pair of Spurs by Texas Spur Maker Danny Pollard; Outside of Spurs have D WEBB and are Marked “Pollard” and “74”; Inside of One Spur Marked “From Cowboy&rdq
...Click for more info
Pair of Early Box Spurs; Circa 16th to 17th Century; with Rowels Turned Flat and Long Shanks; Type Used with Armor; See All Photos for Condition; No Texts; Call (254)541-5765 or Email Only; PE
...Click for more info
Nine (9) Vintage/Antique Toy Cap Guns and One Set of Toy Spurs; Not Sold Separately; NO RETURNS; See All Photos for Condition; No Texts; Call (254)541-5765 or Email Only; PERSONAL PROP
...Click for more info
Add some style and character to your Smith and Wesson Frontier with grips hand made from Mother Natures material
Made to fit your Smith and Wesson Frontier, these grips are hand make with bark
...Click for more info
Lot of 10 Carson City Slabbed and PCGS Graded Morgan Silver Dollar Coins; Not Sold Separate; They Include:
1884 CC MS63
1884 CC MS63
1883 CC MS63
1882 CC MS63
1882 CC MS63
1884 CC MS63
1884 CC
...Click for more info
The item for sale is a pair of Chinks purchased at a recent Texas Gun Collectors Association show. This was Lot #41 in their flyer. The description from their flyer is "One (1) of One
...Click for more info
The item for sale is an Antique Cartridge Money Belt. The belt is in high condition and probably made in the 1880 - 1890 time period. This is a high quality belt featuring dark brown grained leather w
...Click for more info
A beautiful oil on canvas painting by Lawrence Siebel that was painted and entered into the Greater Washington (DC) Independent Art Exposition (1934-1935 only). The name of the paintin
...Click for more info
The item for sale is a King Ranch Floral Carved Gun Case made in the King Ranch Saddle Shop in Kingsville, Texas. This not only is a work of art but a piece of Texas history. "Several years ago a
...Click for more info
I have search both “John Bianchi FRONTIER GUNLEATHER “ and “Bianchi International”
and can not find this holster and belt listed in their offerings. I find it hard
...Click for more info
The grips pictured are representative of the grips you will receive. Because these grips are made from natural Bone no two will ever be the same shape, color and character. They are made to your ord
...Click for more info
Here is an example of our custom made and hand fit BONE grips. They are highly polished natural bone grips that look and feel just like Old Ivory, with all the strong grain and character of mother n
...Click for more info
Here is a made to order custom BONE grips for Colt Bisley They are highly polished natural bone grips that look and feel just like Old Ivory, with all the strong grain and character of mother na
...Click for more info
The item for sale is a Vintage Mexican Saddle Tree. We have two of these items and this is the smaller of the two. A nice addition to a western collection or vintage gun display. This item is being of
...Click for more info
The item for sale is a vintage Mexican Saddle Tree. We have two of these items and this is the larger of the two. This makes a .nice display for antique guns and/or western items. This item is being o
...Click for more info
A rare framed CDV image of Chief Crow King, a Hunkpapa Lakota Chief that fought at the Battle of Little Big Horn...he had 80 warriors that fought with him. He was one of Sitting Bulls war chiefs at th
...Click for more info
An rare and authentic Trade Dagger made by I&H Sorby of England...circa 1820...sold in the U.S. by Hudson Bay and traders of the time in Canada also. The name is stamped into the blade in the cent
...Click for more info
38 inches overall, large loops, stiching on some loops are lose, 3 inches wide, very good leather, billet has been shortened, believe maker's mark was on the end of the billet.
...Click for more info
Properly known as the "Gardner Shackle", this prisoner restraint was invented by Warden J. C. Gardner in 1866 to curb escape from the Oregon Territorial Prison. Nickel finish overcast iron w
...Click for more info
This Cheyenne holster in Russet brown is made for Colt S.A. with 4 3/4 - 5 1/2" barrels, as well as Remington 1875 and various Colt and Ruger models. Hand-crafted in the USA, it features a leaf
...Click for more info
The Texas Shoulder holster is designed to accommodate 7 1/2 and 8 inch barreled guns, including the 1873 Colt Single Action and its clones, as well as the 1858 Remington, 1871 Colt Army, 1860 Colt A
...Click for more info
Dimensions: 2 3/4" wide with 59" inside measurement.
This Bandolier fits .45-70 cartridges.
It will also fit: .44 Mag., .44 Spec., .38-40, .44-40, .45 Colt revolver cartridges, and o
...Click for more info
This Cheyenne style Holster exudes Old West charm with brass spots, a sewn-in toe plug, and a rich Russet brown color. It is designed to fit 1873 Colt and Colt clones with 4 3/4" and 5 1/2"
...Click for more info
Our cross draw holster is designed for Colt S.A. revolvers with 4 3/4 - 5 1/2\" barrels, as well as Remingtons and other Colt clones from the same era. It also fits Ruger Vaqueros, 1851 Colt Navy
...Click for more info
The J.B. Hatband is copied from an original RCMP hat band. Made from leather with a very nice Brown dye, the buckle is also covered in brown leather, and most important it's cut with a light curved sh
...Click for more info
This holster was offered by Montgomery Ward & Co. It was know to be manufactured by WYETH HARDWARE of St. Joseph, Mo. This full flap holster was shop made and beautifully and elaborat
...Click for more info
A great old whiskey flask made of pewter. The flask is in very good condition. Likely made in the mid 1800s. It has some very minor scuffs, but no cracks. It is ready to provide a century of service.
...Click for more info
Add a bit of class to your Ruger Vaquero Old or New, and improve your grip with these Fleur de Lys Checkered grips.
A polyurethane mixed with Black for the perfect recipe and perfect finished c
...Click for more info
Knife is 11 inches overall with 6 inch blade, blade appears to have been fashioned from a file, one piece hardwood grip, scabbard has hard rawhide liner with buffalo hide sewn on using heavy black thr
...Click for more info
Jonathan Crookes bowie knife, marked. Blade marked "Jonathan Crookes"with his pistol heart trade mark. Knife dates post 1857 when he listed Sheffield Directory as his pistol heart trade mark
...Click for more info
Here is an example of our custom made and hand fit Merwin Hulbert grips. They are highly polished ELK HORN WITH BARK grips that look and feel just like Old Stag grips, with all the strong grain and ch
...Click for more info
Antique pair of NORTH & JUDD spurs and spur straps with surface rust with some nickel plated remaining Spurs. The spurs are 6-3/8 in. long, and 3 1/2 in. wide boot opening. A great pair of old spu
...Click for more info
I have search both “John Bianchi FRONTIER GUNLEATHER “ and “Bianchi International”
and can not find this holster and belt listed in their offerings. I find
...Click for more info
The Gamblers Shoulder Holster-- Keeps revolver always safe and ready. Made of fine natural leather. Nicely embossed, with leather strap to hold holster on shoulder. Lightly oiled to a natural ta
...Click for more info
For Colt S. A. 4 3/4, 5-1/2" barrel. ONE ONLY!! With sewn-in toe plug, and vine and leaf stamped on border pattern. It will fit 1873 Colt and Colt clones with 4 3/4" 5 1/2" barrels, as
...Click for more info
Dress up your Colt DA with a new pair of Grips.
Our reproduction products in hard urethane plastic Our grips are made to close specifications as to assure a good fit to your gun. Some sanding ma
...Click for more info
For Colt S. A. 7-1/2" barrel.
This holster comes with the traditional Cheyenne style boarder stamped pouch and sewn in toe plug. Finished in an antique dark brown stain. Centered on the po
...Click for more info
Original shotgun chaps
These nice chaps are from an estate sale. They have beautiful aged patina, on smooth brown leather. They have a great looking basket stamped belt, and classic large patch pocke
...Click for more info